cobrasatellite
NAXJA Forum User
- Location
- Corsicana
I need new knuckels for a 88 xj dana 30. Some of the places online list same part number some list different. Are 2wd knuckels usable on a 4wd?:dunno:
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
24d knuckels on 4wd?
- Thread starter cobrasatellite
- Start date
wolfpackjeeper
NAXJA Forum User
- Location
- 500' and 500KCAS, RAF lakenheath
the knuckles on my 2wd comanche are different for sure. They use a spindle and normal tapered cup/cone wheel bearings. I would imagine the 88 cherokee would be similar.
On the newer 30's like on the GC they were the same when I looked at the JY, they seemed to just use a stub shaft to hold the unit bearing together.
On the newer 30's like on the GC they were the same when I looked at the JY, they seemed to just use a stub shaft to hold the unit bearing together.
thechief86
NAXJA Forum User
- Location
- White House, TN
some of the 2wd xj's had spindles, but others had the same knuckles as the 4wd, but with a dummy stub going throught the bearing and torqued down. you'll hafta pull the wheel off the one in the junkyard to tell which one you're lookin at.
good luck!
good luck!
