Taking the front axle out of a 01

First time takin an axle out of a jeep. going to take the complete front axle out with all the rubicon express parts still attached, and switch it with my '99. Im just looking for some advice for people who have done this in the past, any suggestions, anything i should look out for, and anything that will help the job go easier, thanks guys.

Sorry not taking the axle out, taking the whole d30 out.

Got to be careful not to FU the inner axle seal pulling the axle out and back in.

Unbolt or remove the following:
CA's, shocks, brake calipers, steering, tracbar, driveshaft, coil spring retainers, vent tube.

Lower the axle and then use an engine hoist to raise the front of the rig so you can remove coils and then pull the axle out.

Assemble in the reverse order.