Can't get FlexPlate off

N

NVRwheels

NAXJA Forum User

Location

Cary, NC

• Jul 9, 2009

• #1

Can't seem to get the flex plate off b/c it keeps spinning. Tried wedging something to make it stop spinning that didn't work then tried cranking on in while a buddy held a wrench the on another bolt the opposite direction and it the bolts still wouldn't budge what gives? Used plenty of PB blaster, any tips?
thanks,
Jake

 

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Jul 9, 2009

• #2

Stick a bolt into one of the holes and wedge it against the block... worked for me, I did it alone.

 

N

NVRwheels

NAXJA Forum User

Location

Cary, NC

• Jul 9, 2009

• #3

MpSlayer said:

Stick a bolt into one of the holes and wedge it against the block... worked for me, I did it alone.

Click to expand...

Alright man all try that, just gotta find one that will fit.

 

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Jul 9, 2009

• #4

I used a 3/8's by 3" from my engine stand

 

W

wishbone

NAXJA Forum User

Location

Carbondalahara

• Jul 9, 2009

• #5

impact. Took me 10 tries without it to realize I needed it. $20 rental for a day.

 

AIbandit

NAXJA Forum User

NAXJA Member

Location

Chico, CA

• Jul 10, 2009

• #6

Ahh forgot to mention i used a 2.5 foot breaker bar