I am planning on running a cross brace from what I left of the old track mount section to the passenger side rail use the factory mount plus tie into the frame plate. The old mount is tied into the back side of the new mount, so I want to use this cross tube as a track bar brace and a place easily mount a center limit strap.. My question is not of the brace that is straight forward , but rather if a 1-1/2 or 1-3/4 tube length of roughly 3 feet with no support in the middle is up to holding the axle as a limit strap attachment without bending ?
I guess if it does bend it will only bow down with no harm but I'd like to know the thoughts here and also use the smallest tube possible.
I guess if it does bend it will only bow down with no harm but I'd like to know the thoughts here and also use the smallest tube possible.