ROKRWLR
NAXJA Forum User
- Location
- Arvada, CO
I have a pair of 10" Bilstein 7100 Short Body remote resevoir shocks for sale. 24.31" Extended length / 14.29" Collapsed length. Valved 180/75 for rear of a XJ. These shosks are rebuildable and revalvable so they should last shock you ever need to buy (unless you have to change length)!
Shocks are in excellent condition. Stil hold nitrogen charge and are ready to use without any rebuild neccessary. They were on my XJ that sits in storage most of the time (not a daily driver). I'm selling them because I replaced them with a longer set of 7100s when I cut up the back of the XJ and had gained mounting room.
I also have a set of JKS bar pin adapters. These will work for either rear upper mount or front lower mounts. These adapters are for spherical rod end shocks like these 7100s or fox and king... These are not the bar pin eliminators used for rubber bushing shocks.
$220 for the pair of shocks (almost $400 new)
Part # AK7110SB03 http://www.eshocks.com/bil_ORvh.asp?Series_Index=Q3&Length_Index=Q7&Manf=All&SubChar=Q
$40 for the adapters ($75 new)
Part # 9606 http://store.jksmfg.com/merchant2/m...PINADAPT&Store_Code=JKS01&Category_Code=Shock
or $240 for the shocks and adapters.
Will ship on buyer's dime. Or pick up near Denver, CO.
e-mail or PM.
Sonny
swillier at g mail dot com
Shocks are in excellent condition. Stil hold nitrogen charge and are ready to use without any rebuild neccessary. They were on my XJ that sits in storage most of the time (not a daily driver). I'm selling them because I replaced them with a longer set of 7100s when I cut up the back of the XJ and had gained mounting room.
I also have a set of JKS bar pin adapters. These will work for either rear upper mount or front lower mounts. These adapters are for spherical rod end shocks like these 7100s or fox and king... These are not the bar pin eliminators used for rubber bushing shocks.
$220 for the pair of shocks (almost $400 new)
Part # AK7110SB03 http://www.eshocks.com/bil_ORvh.asp?Series_Index=Q3&Length_Index=Q7&Manf=All&SubChar=Q
$40 for the adapters ($75 new)
Part # 9606 http://store.jksmfg.com/merchant2/m...PINADAPT&Store_Code=JKS01&Category_Code=Shock
or $240 for the shocks and adapters.
Will ship on buyer's dime. Or pick up near Denver, CO.
e-mail or PM.
Sonny
swillier at g mail dot com
