Search results

To mate up with an AX15 in a 91’ XJ with a 4.0 Litre

There is a good 3/8" play when turning the wheel hub back and forth by hand. Is that pretty bad? Is that really bad for the innards of the differential? How do I correct that? The rear axle housing and differential is a Dana model 44 out of a 1988 XJ. Here is a 4 second video posted to...

Looking for an engine rebuild shop with a excellent reputation that is offering a good warranty. I hand off the Jeep. Shop pulls, rebuild, reinstalls. Have a 1991 XJ w/a 4.0.

Detroit Trutrac 913A589 by Eaton Performance Limited Slip Differential for 30 Spline Dana 44 with 3.73 OR numerically lower Gear Ratio. Original price $500+. Call Eaton to confirm your application. If you have a Dana 44, 3.73 (or lower) open diff, or clutch pack based limited slip on your Jeep...

Five (5) Jeep XJ Wheels restored. Two newly restored (zero miles). Three restored in December. 15", 7", 5x4.5 bolt pattern. Five (5) Goodyear Wrangler Radials. < 5,000 miles on each. P235/75 R15. These are the same make/model tires that MOPAR put on the XJs. One of the wheels is scored on the...

Need an AX 15 from a 91’ to 93’ 4X4 XJ.

Starting point: 1991 XJ. 4.0, 4WD, 5 speed AX15. 1996 Dana 30. 1987 Dana 44. Geared to 3.55. NP231 t-case. 3 Inch lift front and rear. All was OK. No vibes. Installed a reman t-Case and a Tom Wood's double cardigan propeller shaft. Vibes VERY BAD @ 45 mph +. Didn't subside no matter the...

SKU: 632412795 Fox® 985-24-085 - 2.0 Performance Series Rear Driver or Passenger Side Smooth Body IFP Non-Adjustable Shock Absorber SKU: 482885772 Fox® 985-24-084 - 2.0 Performance Series Front Driver or Passenger Side Smooth Body IFP Non-Adjustable Shock Absorber < 1,500 miles on these...

1991 Two Door, 5 Speed, 3 inch lift. All drive-line components, steering components, suspension, track bar, control arms, etc have less than 3,000 miles. Totally new/rebuilt front Dana 30 front, 44 rear. SYE with new Tom Wood's double cardigan front and rear propeller shafts. At 45 MPH plus...

So awesome. Very fortunate to visit the home of the Grand Poobah to work with an awesome guy with top notch technical know-how and skills. So grateful to be a patron here. For sure there are benefits to being a member. Thank you macgyvr!

On a 1991 XJ, on the NP231 t-case, two wires connect to the speedometer sending unit (officially "SENSOR PACKAGE, Distance", MOPAR part number 5233 152). Its a two prong connector. One wire is black with a blue stripe. One wire is yellow with a red stripe. I do not own a ohm/volt meter. Hope...

Looking to purchase new front driver and passenger seatbelt systems for my 91' XJ. Belts no longer retract AND the belts are grease stained and have two small cuts. The product offered by Seatbelt Solutions as "OEM replacement seat belts available for all '84-'96 Cherokees" will not work. No...

The "old" switch didn't work either. Purchased a new door ajar switch from Napa for the driver's side door. Doesn't work. Tried to spin it and re-connect. Dome light does not turn on when door is opened. Key buzzer doesn't work either. Overhead dome light works via the door ajar switch on the...

I have found some posts about clutch problems. But nothing quite fits this. Major step forward. Major step back in the build. Installed a SYE. Swapped the NP231 t-case for a reman with the SYE already installed. Also installed a Tom Wood's custom propeller shaft. :spin1: But then disaster...

Not going to pay $3,000 to move my 91' to 3.73. Looking for a quality 4X4 shop in Indiana that isn't on the ritzy North side of Indianapolis. May I have a recommendation please?! Any good shops in Kokomo? Muncie? Lafayette?