Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
For my 98 xj with a 4 cyl and a/c. They have been discontinued at the dealer and all of the aftermarket ones are just 4.0 hoses so they are about 6-10 inches too short. Found some on eBay from Greece but they want $150+ each for em.
You sounds like the typical driver that likes to drive 15 under in the fast lane and police the roads when you have no right to do so. Stay in the slow lane, grandpa.
they dont really loose their effectiveness, its usually when people remove the hose and dont put the clamp in the same spot that it was removed and creates a leak path where the clamp originally compacted the hose end.
Nope. It's my 4 cylinder xj. It only has 110k on it. Was wondering why the temp climbs at idle. I just finished rebuilding the engine after the previous owner seriously jacked it up.
Most airbag connectors have a built in shorting bar for when the connector is disconnected or poorly installed. maybe the passengers airbag was never plugged in well or one of the connectors is malfunctioning.
Got a call back from the local dealer. Supposedly some 97+ 2 doors equipped with the 2.5 and 5 speed got built to export specs and used a 2.5 diesel mount setup. Best part is they were discontinued back in 01. Haha.
Those aren't right, these are a completely welded assembly. Only way to replace is to unbolt the entire mount bracket from the frame or press/cut out the insert.