Search results

I have a leak on my fuel pressure regulator and it seems to be just the o-ring on the vacuum side. My auto parts store will only sell me the whole unit with the o-rings for $130 and not the o-rings on there own. Does anyone know the sizes of the o-rings or if i can by them on there own? I heard...

My 92 xj has a very strong gas smell from what I think is coming from under the hood when first started up. The smell goes away in about 10 mins of driving. I did a little searching and it appears that xj's have a common problem with there injector o-rings wearing out but I have look and mine...

I switch over to a 5.0L ford (wix) oil filter last oil change then a few days later i noticed my oil pressure gauge needle bouncing all around while driving. I figured i damaged the oil sending unit sensor or got it wet during the oil change and didn't worry about it. Today i did another oil...

After months of messing around with my lights i have finally found out why they dont stay on. The head light dimmer switch on the steering column is slightly melted and 2 wires on the harness are flaky and staring to fray. It also explains the burning smell coming from my feet when running my...

I just finished swapping in a d30 from a 86 into my 92. Everything went great expect i cant get steady brake pressure at the pedal. I installed new calipers and blend them at least 20 times each. Once i leave the pedal for 5 secs after bleeding the system is goes right to the floor. any ideas?

Can i put 92 brake lines on a 86 d30? The d30 brake lines look like the have a 90 degree bend in them.

86 calipers,86 knuckles, 92 hubs and 92 rotors..... Will this setup work? If no why?

Will 92 d30 knuckles swap onto a 86 d30 ? any issues with the ball joints?

Anyone know the socket sizes for the nut on the upper/lower ball joints on the d30 ?

I have a donor axle i am gonna swap into my xj (92) from a 86. I noticed the brakes are different and if i wanted to keep my current brakes i would need to swap the knuckles. Are the brakes better in my current setup or will the 86 system be the same?

doing a knuckle swap. Anyone know what the torque specs are on the upper and lower ball joints?

On my xj i have the bosch h4 conversion with 55/65 watt bulbs. The problem is when i turn on my headlights they only stay on for a few mins then turn off for a while then turn back on all by themselves. They will not stay on consistently. But when i have my high beams on i have no problems at...

Looking to find my DRL modul on my 92 xj. Anyone know were its located ? pic maybe...

I have got a h4 conversion on my 92 xj with 55 watt bulbs. Today i notice while driving my low beams keep switching to my day lights then a few mins later my low beams switch back on (hope that makes sense). It does matter if iam sitting at a red lights on moving still does the same thing. Any...

Sorry its a cell phone pic. What is this white connector about half way down the steering shaft under the dash. The brown/black and purple/white wires are broken and melting need to replace ASAP. There is a rod coming out of it and goes towards the steering wheel...

I have a 92 with a bosch h4 conversion kit with 55/65 watt bulbs. Today while driving to work i noticed a burning smell from under the dash on the driverside. Someone at work suggested the head light switch might be burning out do to the after market lights. I used the search button and did a...

I already have a 4.5 inch lift with short arms. Adjustable trac bar .No sye or drop brackets. I was looking to add a 1 inch spacer and 1 inch shackle to it. Will the ride be way to bad that i need drop brackets or long arms? Anything else i might need?

My cat needs to be replaced and my buddy has one with very low kms left over from when he did his exhaust. His cat is from a 93 zj which is the same part number as a 93 xj..... The problem is my xj is a 92 and looking online at napa's part numbers they are different? Why is there different part...

I got a 92 xj with a 4.0L ho. It has a magnaflow cat and flowmaster muffler. Just did a tune up and replaced the spark plugs, wire, car/rotor and did the sea foam thing. It failed a emissions test today with the following scores: ----------------------Max Allowed------------Vehicle...

I have done lots of searching on the net over the last few days but just wanna hear from somone who has done it. I have a 86 xj vacuum disconnect d30 with 4.10's waiting to swap into my truck. I plan on pulling my current shafts which are non disconnect and bigger u joints and installing them in...