Search results

I could use some guidance as to whether or not narrowing an axle for my 2001 XJ if the right thing to do. This weekend I picked up a D60 out of a 05 Super Duty and my gut says narrow it, but I want input from people who know more than me. I've been running 35s on the trussed HP D30 in my XJ for...

Today at lunch I picked up an 05+ Super Duty D60 that's going under my XJ (replacing the D30). I haven't gotten it under the XJ (haven't even gotten home yet) to check fitment however I am seriously considering cutting the long side down to both narrow the width (I prefer the narrower track to...

2001 4.0 manual XJ It (finally) rained here in Phoenix on Wednesday and I was out playing around running through puddles (not deep, just big puddles). I went through one of them and my tires flung a wash up over the hood (35" MTs with cut fenders). Not long after that, I started getting...

2001 XJ, 6.5" of lift on 35s I'm running OME 4" lift springs and BWE Comp Shackles. With my current setup, the shackle is almost vertical (rather than the ideal 45 degree angle) and the spring is pointed "up hill" towards the front. This makes the ride rougher and severely limits my rear drop...

01 XJ I just replaced my factory water pump (and t-stat neck) with a Wesco high flow pump (and neck). Prior to the water pump swap, idle temp was around 180-185. Now it's idling at around 200. If I idle up to 2500 RPM, the coolant temp comes down to 185. The cooling setup consists of: - 3...

I want to mount my Winch behind the front crossmember (under the radiator). However, if I center the winch, it hits the steering box. Is there any reason why the winch couldn't be mounted off-center towards the passenger's side?

I want to link the rear of my 01 XJ and am trying to decide between a 3 link and parallel 4 link. Current setup is a 6" lift using OME springs, relocated shackle mounts and BWE Comp Shackles. The axles is a trussed XJ Dana 44 with 4.88s. I can't do a triangulated (at least not upper...

2001 XJ, 4.0 with a 160 amp Durango Alternator that idles at 13.8VDC (confirmed with volt meter). 3 month old Optima Yellow top battery. Battery, alternator and ground (both from battery to frame and frame to engine block) cables are 2/0 gauge audio grade cables. No cranking issues. I've been...

Here's my dilemma, I have to either get new rear leaf springs or convert to a triangulated 4 link. The current bastard pack (XJ main and S10 leafs) is shot (technically the XJ main is shot) plus I need the rear to go up 2" to match the front (front is at 6.5" and rear is a 4.5"). I'm leaning...

01 4 door XJ. I'm looking for a way to stiffen up the rear cargo area/rear hatch area of my XJ. I was out wheeling last night and stopped on a really flexed spot (I was checking suspension component clearance/etc. after making changes). I opened the rear hatch to get something and then...