Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
So then the coolant sensor will read a lot cooler on the radiator side of the thermostat than it would if the sensor was in the block just below the head.
Because the 1990 renix was designed with the sensor in the block and if that spot is hotter than the radiator side of the thermostat than...
I cant prove it. It just seems logical that the temp in the block would be hotter (where the coolant sensor location), because that's where the heat is generated (cylinder head).
The coolant at the other side of the thermostat is cooled by the radiator.
Block side = hot [[thermostat]] sensor...
The 1990 renix coolant sensor is in the block reading coolant temp which would be hotter than the coolant at the thermostat housing.
The 1991 coolant sensor is in the thermostat housing reading coolant temp which would be cooler than the coolant in the block.
Question:
What Change on the 1991...
Re: Guess what? I have a RENIX XJ with a rough idle and misfires!
The automatic TPS four-wire connector A,B,C, and D, how do you back probe and test D when there is no wire connected to D?
Talked to Bosch today and was told that if they changed the white porcelain o2 to a metal body, and if its the correct one (purchased at an approve retailer), there should be a number on the sensor body. 500E263073.
I installed a white porcelain bodied bosch 12009 sensor that replaces factory P/N 4713639. Tested 5 ohms. Had no more than coupe hours idle time due to engine diagnostics testing.
Then the engine began misfiring real bad and wants to die and running vary rich. retested ohms reading on o2 and...
Is anyone familiar with all the components needed to make use of the DRB ll for the 1989-1990 jeep Cherokee engine and transmission?
Also,
I've heard of so called super cartridges around the net but don't know what makes it a super cartridge over the other cartridges.
thanks in advance for...
Is anyone familiar with fuel sink?
MT2500 shows fuel sink switching back and forth from + to -
My 90 renix fuel sink was switching back and forth but now stays on minus.
I found an Orange wire with black strip which is a power wire to the o2 senasor relay had been cut and soldered to a red hot lead leaving the rest of the OR/Bl to the fuel pump resistor dead.
I would post a picture of the wire switch but there is no way to do so without that picture coming from...
How do you upload an image from your computer when starting a new topic or relying to a topic. The only option I see is via a web link.
I submitted a help question on this topic to the web master but never get a reply back.
Any help would be appreciated.
It does.
I was freaking out because I did a ohms test on it and got nothing.
Called dealer for a part number I could reference. But all the coolant temp sensors I searched for and part number I got looked nothing like the knock sensor (which I thought was the coolant sensor)
I was thinking...