Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
99XJ 192k miles
I think my compressor is at least 7-8 years old, and I believe it is going out.
My car runs very smooth, but when the AC clutch engages the car shudders and vibrates very bad - no squealing noises but it is loud. When it disengages, the vibes go away. I've been running it like...
Hi All,
I just replaced my steering box bracket, tie rod ends, and steering stabilizer. I took it to my local shop for alignment.
The guy said they got it mostly aligned, but that my camber and caster is off and that I will need shims and an offset ball joint to bring them back inline. He said...
I blew the dust boot on the TRE connecting driver side wheel to tie rod.
Trying to remember which one that is so I can call NAPA and order a replacement.
Pretty sure it is NCP 2692789 - Left;w/ Left Hand Threads;11/16" 18 Thread
https://www.napaonline.com/en/p/NCZ2692789
Sound right? Thanks!
Yeah and pumping until I saw the old grease start to seep out is what I did :(
That's what I read online and thats what I did., Lesson learned, oh well. Guess that will be my third trip to NAPA :D
I just replaced all the TREs in my front steering. I am all stock tires/suspension/etc.
I drove it a few days, maybe 10 miles total. I was back under the car today checking on everything, and noticed a shit ton of grease all over the driver side wheel hub and rim. It had definitely burst/spewed...
I finally replaced my tie-rod ends.
As I was greasing up the ball joints (Slowly), 3 of the 4 took about 20 pumps before grease started oozing out from under the boot.
The drag link to steering knuckle took about 3 pumps before a shit ton of the original and new grease shot out the side. The...
That's the puller I'm using currently. Yes I'm replacing my TREs (so tie rod, drag link, and TRE at pitman), I've already got the tie rod out and it worked well. Now I am trying to remove the entire drag link. I figured I should remove the steering damper from the drag link first, then remove...
It's being a real PITA. I've got a HF TRE puller and have been slowly tightening it down, spraying PB, then beating on it with a hammer.
My question is... do I need to remove the steering damper from the axle first? I want to make sure I am not hurting the damper trying to push it off the drag...
Reviving an old thread here, but I finally replaced my stock steering box spacer and unfortunately it was not cracked and the issue persists.
I'll be replacing my TREs within the next week, then will start looking into the other recommendations here.
99 XJ Limited
Automatic
4WD
190k miles
all stock daily driver
Hi all,
Recent troubleshooting here led to realization I need to replace my steering box bracket, as well as the tie rod ends.
My googling tells me that while I'm there, I may as well replace ball joints too. I've never greased or...
That makes sense. I felt I was able to wiggle the steering box up and down which seemed weird given how snug it is against the rail.
Is it worth upgrading or replacing the steering box while I'm replacing the spacer? What about the rest of the system? Definitely looks like wherever any 2 bars...
It is definitely related to my front steering linkage. I can hear it and feel it all over the trackbar, pitman arm, steering gear, etc. I can also feel many of those wiggling just a tad when I push up and down on it. Given how worn out all of that looks, I guess it needs to be replaced.
Is this...
I'm thinking it is something along these lines. I'm attaching some pics, apologies for stupid imgur flipping my photos upside down.
The noise was very loud at the front drivers side, under the steering pump. I can hear it very loudly on the front frame where the bumper ties on:
I can hear it...