Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Not sure how I would ship them, but if you want them, I can see what it would cost. Have the nuts for them too, just not shown.
https://drive.google.com/file/d/0B6ZuFcYaxhyYcFN0SWduYXIzeHc/view?usp=sharing
I have a set of these I bolted up once and then took off.
https://www.jcroffroad.com/product/XJMISC/XJUNR.html
$40 plus shipping. Should fit in a small flat rate box or envelope.
https://drive.google.com/file/d/0B6ZuFcYaxhyYWmtpcDNDQk9tV2s/view?usp=sharing
$1500 and it's yours. Yep, it's beat up and I would change out the rear gears since they make noise. Been beating on them for the last 10k, though, so if the noise doesn't bother you, there is that.
https://norfolk.craigslist.org/cto/6224722784.html
I didn't see anything explicitly restricting this, so remove if I'm out of place.
We moved back east to get better services for our 2yo. It's a great location if you are relocating for Nucor, Autoliv, Walmart warehouse, Orbital ATK just to name a few. Price is negotiable...
My realtor went by the house to get a listing together and noticed the folks who cleaned it up left these behind. I can have my inlaws pick them up for safe keeping if anyone is interested. Paypal would be preferred.
The amount of movement in the video as to be way more than it should be, right? Seems this is why it won't stay engaged with the cable pulled all the way out. Is there supposed to be a bushing between the shaft and the inner side of the housing?
Click for the video:
I like my AC so for now, I don't want to use the compressor for air so I'm looking for something decent I can throw in the jeep. I'd like to use it for tire inflation for now. I plan on plumbing an external quick connect so I can inflate some bike tires without having to run the jeep.
Any...
Is there just not a lot of craiglist action around here that there isn't a best of thread?
Found this rare beauty for the low cost of 10k.
https://eastnc.craigslist.org/cto/5994405180.html
I'm guessing he's never been on Naxja and seen how many people are in love with the 242's in their XJ's.
I want to put an axle with locking hubs under the XJ so I can get rid of the CAD and not have to buy or rebuild/balance my front driveshaft and turn the C's. This jeeps crawling days are over since I live 1/4 mile from the Atlantic so I don't need anything built. Something with 4.56 or 4.88's...
I trailered the XJ on our cross country move and since I had the space, we threw a bunch of crap in the driver's seat. Things shifted a bit, I think and put some pressure on the turn signal arm and now my horn essentially doesn't work. If I shimmy the steering wheel up and down on the adjuster...
So I pulled the seats, console, trim and carpet out to fix all the rust. Everything is patched and primed. I even took the time while the console was out to pull the transfer case shifter out to drill the hole it needs for the BoostWerks linkage. So far, only a marginal improvement in road noise...
So my rig is moving back to Virginia Beach with me and will spend more time on pavement than dirt and when it does get dirty, it won't be anything like what we have in northern Utah. I was looking for a quieter tire with less rolling resistance so I could maybe gain some MPG.
From the looks of...
I'd highly recommend following the advice that I completely ignored. Now I need to clean off all the melted rubber backing from the carpet before I can patch up the holes in the floor.
Also, if going high enough to trim the doors, I'd remove the wire bundle under the floor trim too. Thankfully I...
91, AW4, 33's @ 28psi, regear to 4.88 and new speedo gear verified by GPS for proper speed on dash.
I currently only get one code (62) and it's possible it's wiring or an ECU going bad, I think. I've had issues from the start where the speedo needle will not work and then suddenly come on. The...
Sold my press and I don't really want to spend the time resetting gears if I can find an 8.25. Or if anyone wanted to donate a takeoff they have lying around, I can build that up and deal with the noise while doing so.
So I have a couple things I need sheet metal for and the stuff I have currently it way too thick for simple repairs or flares. I mocked up a bit of a frame for making flat flares so I'd love to kill two birds with one stone and use the same metal for that and my rusty floor fixes. I don't have a...
I'd like a little help reading this gauge. It's hooked up to my brake booster line and I'm at about 4400' ASL. I'm running it because I feel like it's running rough but every time I find and fix a leak in a vac line, it doesn't seem to change much.
Tuneup with Champion plugs, new cap, rotor...
My gauge is pegged now. It moves some when I turn the ignition on and when I check resistance to battery ground from the sender itself, I get 300-400ohms, I think. I know I get some and it fluctuates telling me it's at least reading something.
My problem is I can't find in the FSM which pin on...