Search results

I paid $65 per knuckle, and loaded calipers and rotors from the DEALER is $280 the knuckles need spacers welded to them to push out the hubs so the u joints sit right too ORGS has these and other parts for the swap

Very diverse they let DOBs in almost everywhere here!

In 91 they changed from the GM style to the Nipendenso. The GM (pre 91) is internally regulated and the Nipendenso is not. The GM can be upgraded to 140 but the newer nipendensos can be swapped for a bigger unit froma grand or ?

The traffic really isnt that bad and sure there are pleanty of idiots out there but again not that bad. Sounds like Choo Choo needs a vacation! :scared: The weather is gloomy in the winter but gets pretty nice in the summer. I dont commute to work but I find myself driving all over the place...

Phil- 1st of all I DID NOT post this to start a "flame war" I posted because I would like to see more results in "your" forum or chapter or whatever... I dont understand the reasoning behind some of your ways and how you are going about this chapter so I posted about it! AS a XJ owner and...

I really dont get this! The way this is going is completely counter productive in my eyes. There was a bunch of interest in the beginning and then everything started being edited and deleted and so on. Now there is only like 2 or 3 topics on here, looks real inviting. Espesially when on the...

The O2 sensor is about a year old so that could be it? But I think I found the problem...the upper brake pedel switch, the one that controls the TC and whatever else is not aligned properly with the rod. So it it is slipping off and disengaging the TC. I am guessing since there looks to be a...

Well after changing out the messed up distributor cap, fuel filter, brake switch for TC lockup, TPS sensor, PS pump, PS box, and the transmission! I am now getting a strange light serging when driving on the freeway. It is almost like if you could tap the brakes very quickly or maybe an...

Well my AW4 finally gave up the ghost and I replaced it with another with only 32k on it. Finally it is driving like it should but there is only two things that doesnt seem right to me... When it shifts from 3rd to 4th(OD) the RPMs drop as expected for a second but then they jump back up for...

The cable on the Throttle body that goes towards the pass side. Just open the throttle full and push the D shaped button on the cable retainer to tighten the cable. Hope that makes sence? Tim

Re: 2wd or 4wd? I *think* the 2wds use a rack and pinion system not the gear box like ours. Any update on how this works, fitment, performance ect?... Tim

Hey Weasel- was the box you looked at one with the snow plow package? I searched www.car-part.com and it showed 2 different ones. Just currious to see if both are the bigger 3.5 size or just the snow plow version...and damn they want a fortune for some of them! Tim

Thanks! I did try the search but for some reason me and the search dont work well together:twak: I need yet another box for mine and if its the same price yhy not upgrade it? Tim

Looking on JU a while ago I saw a post of someone "saying" that a Durango steering box will fit on the XJ without modification. And also they got the info from here! Does anyone KNOW if this is true or is it typical JU shit... It was also said that it was a stronger box and comperable to...

The Borla manual tranny header will fit as I have one in mine. Mine is an automatic. The notes say due to shift linkage interferance but that isnt a prob inless yours has column shift. Check 4wheelparts or Summit or also www.4wd.com... I bought mine from 4wheel parts a year ago and it was...

So far I have done nothing with the proportioning valve on mine, and all seems to work good. I also have a 8.8 with discs but I still have the 90 MC and booster. I am experiancing a low pedel but it seems to brake good, the rear will lock if need be. Hopefully when I install the WJ MC and...

I second the YJ lines. I have the RE ss lines and one actually snapped on me, going over a tristy section too fast...these are the lines that came with the kit! I replaced the broken one with a YJ line and it is actually longer! Tim

I just did this swap and this what I did: 2001 8.8 w/ 4.10s posi complete..$300 MORE kit w/ yoke adapter. $216 shipped 97 explorer left brake line. $20 This did not cost very much for me and a freind did the welding for me. We did the complete swap, welding and all in one afternoon start...

Does anyone have a 1996 factory service manual that wouldnt mind sharing the wiring diagrams? I need the wiring diagram for the steering column plugs. I would just go and buy it but I dont have a 96 so it would be a waste of $$. I looked in a Haynes manual but it didnt show jack for a 95+ due...

I dont want to burst anyones bubble but shipping for one of those cost me $40 for ground UPS. Its light but oversize makes in spendy. Its was WA state to Maryland though Tim