Search results

Two of us have went through all the typical troubleshooting to try and figure out why my cruise stopped working unexpectedly. Is it possible that the dash light will not come on if the servo is malfunctioning? Is there a test to test the servo? Thanks, its a 2000XJ

Driving down the interstate and a 80 degree day so I flipped the AC on. AC is putting out cool air and then a couple minutes later my check gauges light comes on and my Temp is near 240 degrees. I flip the AC off and the temp drops fairly rapidly back to normal 210-215 degrees. The AC compressor...

Obviously the stock plastic fan shrouds are not meant for any abuse, I have gone through two of them because the shroud breaks at the mounting points. This causes an imbalance and the destruction begins. So my question is. Is their a better quality fan replacement for my 2000 XJ that actually...

I'm having trouble finding a spec for the width of the upper control arm bushing on the frame end. So far I have seen 2.00" and 2.32" listed. Making my own adjustable arms and my jeep is not available right now to measure. It's a 2000 XJ...thanks.

I am making my own control arms. I have the lowers done and used creeper joints on the axle end and urethane on the frame end. I'm wondering what is a good option for the upper control arm on the axle side? Any suggestions. I was contemplating the Rubicon Express RE3762.

Between, lights, winch, other accessories I need battery terminals made to hookup more than one accessory. What do you all recommend?

I have noticed lately when I am slowing down and almost to a stop I feel a chatter kind of vibration in the rear end like you just ran over some of those rumble strips on the highway. Doesn't matter if I am turning or going straight forward. Any advice? U-joint or ring and pinion? It is a stock...

Recently installed a Smittybilt XRC rear bumper on my 2000XJ. It also came with two lower quarter armor shields that pop rivet onto where the old bumper caps were. They both have a big slot cut out of the front in the seam or bend. This just looks like a great way to trap dirt and moisture. Does...

2000 XJ - I'm guessing an actual control switch issue but when I turn my fan speed up to #3 it stops working, it does this with heat/vent or AC on. 1,2,4 speed positions work fine. Never hurts to ask right?

I decided to try out the black magic pads, new centric premium rotors and calipers on my 2000 XJ. While pulling the front brakes apart I noticed the inside of the rotors didnt look like they had been getting pad pressure. They were all rusty and pitted but the outside of the rotors looked...

Heres the deal. I am fighting an exhaust leak ever since my stroker build in my 2000 XJ. I use the 2000 HO intake, Edelbrock 4.0 head (which has the old exhaust ports) and currently a Banks shorty header for a 2000 XJ. This means the header doesn't really match the exhaust ports on the head. If...

I am looking for a new front bumper for my 2000XJ but I would rather just have one with a 2" receiver and mount my winch on a plate I can install in the receiver as needed. Does anyone see a problem with this type of setup? I know JCR makes, one how about anyone else?

I recently replace my 4.0 with a 4.6 stroker. I also converted the TB to 63mm, bored polished and made custom butterfly plate and piped the CAI with filter into the cowl. When driving and you tip into the throttle you get a high pitched tea kettle type whistle that goes away the more you mash...

I have a 2000 XJ and I added cruise control to it a couple years ago. It has worked flawlesly until I swapped in a new motor. Everything checks out mechanically. No air bag light, horn works fine. Cruise dash light does not come on. Can anyone give me guidance on how to check the switches and...

Anyone have an automatic shifter bezel in real good shape for sale? :eyes:

I simply got sick and tired of driving with my right leg bent all the time, it was making my hip hurt. I am 6'2" tall and the extra 3" I just gained in distance to the pedals feels great. Very easy fix. Love it.

What are the odds of the oil pressure gauge pegging and vehicle speed sensor going bad within two minutes of each other? I'm thinking I may have disturbed a ground somewhere. Started jeep up and headed into town, I instantly noticed my oil pressure gauge was pegged high. Then within a minute I...

I blew the brake line going from the prop valve to the rear axle over the weekend. I replaced the line and bled the brakes but the warning light on the dash is still lit. Guesses as to why? Brakes functioning just fine. 2000 XJ non-ABS.

I have had a pretty loud knock or bang coming from the left front of my 2000XJ while driving. I have a 3.5" lift and 31x10 tires. This happens under hard braking or driving over a pothole in the road. I have replaced the stabilizer ends with new bushings, new shocks, new coil springs, new brown...

My sway bar end link bushings are tore up. Does anyone make a stock style end link that's longer for a 3.5" lift on a 2000 XJ? Or do I have to go with the disconnect style?