Search results

90xj06.......THANK YOU!!!! I went to digging around the wires under the steering column and sure enough one had worked loose!

OK my heat was not working and neither was my ac. The blower was working so seeing as I just replaced my heater core and had my ac recharged I figured it was my blend door actuator. Everything on the jeep was working, engine ran great. Get the dash off and pull out the whole unit. Take it...

OK so I have a 2000 XJ 4.0 about 235,000 miles on it. It's started clicking real bad in the front near the timing cover and was taking longer to start than usual so I figured probably the timing chain. So I parked it. Pop open the timing chain cover to put the new chain on and notice the timing...

I have done some minor wheeling but nothing that crazy.

I have never even touched the suspension in any way, this thing is bone stock. Im the second owner and the little old man who owned it before me never took it off road or did anything with the suspension. So do I need a new pan? How do I fix it to keep from doing it again?

Well after cleaning the pan off I found two sizeable dents from something pretty sharp. They did not punch through but one came close. Still debating on whether I want to blow $80 on a new pan...how the hell this happened is a complete mystery to me.[/URL][/IMG]

Well I was changing my RMS cause I thought it was the cause of my oil leak but it turns out it might be my oil pan. Pulled the pan and found a place where the rim was dented/torn. My question is shoul I replace the pan or just lightly hammer the part back to form. Here are some pics of what it...

I really like that rear bumper/tire carrier you are planning on putting on there. Where can I find one like that cause I'm trying to build one and need to find out where to buy the materials.

A 9500lb mile marker winch will be going on it. I did want it to be lighter seeing as its my DD.

I'm building my first winch bumper and I'm having a hard time finding the steel I had originally wanted (2x6 tubing 3/16 wall). I have found some 2x6 1/8" wall tubing and was wondering if that would work for my build? The mounting plates that will bolt to the frame will be 3/16". I'm not going...

It does have an oil leak but it looks like its from the rear main seal and its a very slow leak.

I have a stock 2001 XJ that smokes like crazy from under the hood when I'm going up a steep climb. When it starts smoking I can see about a 20 psi spike in oil pressure. The smoke doesn't smell sweet like antifreeze but it isn't a very dark color either. Anyone know what would cause this? I...

I'm looking to save some money and give someone local some business and wondered if anyone knew of any place/person in North Ga that does a gear install cheap? I searched around but nothing came up so I decided to ask. I live in Cleveland, GA but I don't mind driving if anyone knows of a place...

Cleveland, GA right now.

Wow.......you are cool.

I know this is an old post but does anyone have this write-up with the pictures? I cannot get the pictures to load.

So I don't have to pull the whole dash for the blower motor? Will I have to disconnect ac lines to pull the motor? Since I have to disconnect ac lines to do the heater core and evaporator I figured I would do them both at the same time. If I don't have to remove the ac lines to replace the...

I'm replacing the heater core because when I turn the heat on there is a strong antifreeze smell. I figured it was the heater core because I can only smell it when the heat is on.

Awesome, thank you for the info!

I have a 2000 XJ 4.0 and my ac and heat work perfectly fine except the blower setting does not work on setting three. It works fine on setting 1, 2, and 4 but not 3. Any ideas what might be wrong? Also, I'm replacing my heater core and was wondering while I have it torn apart what else should...