Search results

Or Bent????...lol Anyone ever seen a Rustys trac bar with this much bend? Bought it second hand and is installed on my Xj with 8.5" lift

Ok I bought this 88 mj cheap from a guy. It was already taken apart when I picked it up. He thaught that it had jumped timing. 2.5l. The timing cover was off and I verified that the timing gears and chain were installed correctly. At TDC the rotor points to the #1 Wire Used a Timing light and #1...

Any body have a quick fix or a write up on how to do this swap? As far as i can tell the brackets are non compatable. I guess i could weld something up but that is not my first choice. The new seats are out of a 2000 and they are going into a 1991. Both are manual. Thanks

Ok so my 01' Limited has heated front seats. Drivers side works great. Passenger side does not work. I just get the blinking light when the switch is pressed. Do i have a bad relay or something thanks!

OK so im trying to finish up this SATANIC heater core swap. Got the housing back under the dash. Re conected everything and guess what?? Air only out of the defroster. Got vacume on the firewall side, but none on the connecter for the controls? Am i missing something? THe good side is that now i...

http://raleigh.craigslist.org/car/208798414.html.

I have been playing around with this game I found called screamer 4x4. Its got a couple of cool vehicles including a cherokee. You can even get a damage patch for it. Not a fast race game, but fun to crawl on.

Not fuel pressure. 89 4.0 auto 4x4. After a couple of miles my gas tank builds up a lot of pressure. So much pressure that it makes my fuel rail o-rings leak. When i take the gas cap loose it lets pressure out for at least 8 seconds! Ive replaced the cap. How does the rennix tank vent? If its...

OK so im gonna attempt to swap a 8.25 out of a 93 2wd cherokee into my 89 d35 4x4. I the complete donor jeep. Im wondering about gears? and im wondering about driveshafts.?

Just picked up a 89 laredo for $150 on sunday. 4.0 auto 4x4 4 door. Has a factory LSD And Skidplates(YAhoo this is the first one to have these out of the 15 ive owned). I got this just as a toy too go explorin with. Ive lifted like 10 jeeps and its gettin old, so I tought id try something new...

I need to know if anyone has or if it is possible to convert a 2wd aw4 to a 4wd aw4 while still in vehicle. I know that the tail sections are different. I dont want to swap the whole trans becase mine is good. So is the tail section interchangeble and what al is involved in doing so. Thanks

Well latley when i have below 1/2 a tank of gas and turn my jeep starts to sputter and stumble. sometimes it will stall sometimes it dosent. it never sputters more than about 5 seconds after a turn. It mostly does it on right turns but it has done it on left turns a couple of times. Also under...

Well i did the SOA on my truck today. I just flipped the shock mounts from side to side (l+r) and are now installed on top of axle. Now my shocks are bottoming out. Id like to hear some ideas and see some pics of your SOA MJ shock setup. Thanks

Will a 3 speed auto off of a 2.8 work with a 2.5?? IF so what all is needed? Thanks

Ok so i got my 6.5" lift coils yesterday. I was runnin soa in the rear with a 6" spacer up front with stock arms. ( I know spacer garbage) This coil is humungus. I dont think its gonna work with my stock control arms. What do i need to do to get operational. (50%onroad 50%off-road) Do I need...

ok im working with a 89' comanche 4.0 4x4auto. My front axle is crap(u-joints busted,rusted,leaking). so i am trying to switch it with one off of my parts jeep(86 2.8) I have just come to the realization that my replacement axle has 4.10 gears in it. Ok thats cool. Im running a 6" lift and 32's...

Well I picked up a 97 country 2 days ago. Its got 101k on it. When i was checkin everything out i noticed that the radiator had some crusty looking stuff in it. I told the sales guy and he said that they would flush it. Well I got to pick up the jeep and check the fluid. Looks great. Well today...

Ive been working on my 84 2.5 auto and I have been having problems. I couldnt figure out the linkage and my cooling output line was stripped. Well today i tapped out the hole and fixed the thread problem. Hooked everything back up filled with fluid and started. All was fine in neutral. when i...

I have a 1984 wagoneer with a 2.5 and a 3 speed auto. I cant figure this linkage to the trans out. Does someone have a diagram or a picture? Thanks a bunch

I was looking to buy this jeep from this guy. Its really cheap but im kinda worried about it. I checked the vin form the windshield and the radiator support and they match. Where are there other vin's so that i can verify this? Thnkxs