Search results

Installed some LED blue dash bulbs in the rig and they look really good. The only problem is they flicker from the inconsistent current produced by the alternator. Anyone else deal with this and where did they wire in a resister to cure?

I have a lifter that bleeds down overnight, and briefly rattles when I fire it up. Is this something that should be replaced, will it cause damage over time to the cam? #2 exhaust. Thanks

Has anyone switched over to one of these instead of relying on the one in the computer?

Who has everyone had good luck rebuilding Jeep computers with? There are a few on EBay last time I looked. Thanks Greg 1994 XJ Cherokee, 4.0, Ax15

Shopping for tires today I was talking to a salesperson at Discount tire. The salesman was telling me the Cooper Discoverer tires were much better on ice, and a lot quieter than the Goodyear Duratracs. Is this fact, and just opinion?

Getting everything together for my 4” lift and 31” tires. 1994 xj 4 door, 4.0, ax15, NP231, 1987 Dana 44 rear. Planning on a SYE off the bat with TW driveshaft. With a 4” lift, what shim thickness should I start out with to line my pinion with the driveshaft and have a chance at not swapping out...

I just picked up a set of used lift coils for my stock 1994 XJ, and was told they were 3” OME lift rated for XJ. To verify before ordering additional lift parts, I took them down to my local ARB office and had a tech look at them. He came back and said they are actually 4” TJ springs, and they...

Anyone know which is the correct position for the clutch fork? 1994 Ax15. Just pulled my transmission to fix a broken clutch fork clip. Had mine mounted with the throwout bearing spring clip slots on the right passenger side of the bearing retainer. Going online and looking at photos I see these...

I hope someone can answer my lifter question. I have one lifter, #2 exhaust, that bleeds down overnight. Every morning I hear that lifter rattle for a second before it quiets down. I've been told it does not hurt anything and let it go. Is this a good idea? 1994 Cherokee 4.0 manual. Thanks

I own a 1994 xj 4x4 with the 4.0 manual transmission. Just curious why my cold air filter box is not plumbed to the front outside of the jeep? Just opened to the engine bay. There is a plastic plate Instaled to block off the opening to the outside just in front of the box. Looks factory. Any...

Looking for a Dana 30 powr-lok, either working condition or for parts. Thanks. Greg.Barkley@ Comcast.net

Has anyone ran one of the power locks in there front Dana 30 and how did you like? Street manners, ice and snow, steering and control. This would not be for rock crawling or serious mudding, mainly mountain logging roads throughout the year in the Pacific Northwest. I have a chance to pick one...

Does anyone know if the 2003-2006 rubicon tj Dana 44 gearset will swap into a 87 xj 44? Standard cut, 4:10 ratio. The only thing that I see that would need to be addressed is the tj ring gear bolts are 7/16 and the xj are 3/8.

Setting pinion bearing preload on my Dana 30 gearset today and noticed on the Yukon website they call out for 12-15" pounds of torque on new bearings but my factory service manual calls out for 15-35" pounds? Now that is a big difference. Factory service manual typeo?

Does anybody know which bearings Come stock on the early 90's Dana 30 ring and pinion front differential, Koyo or timken?

I started my 94 Cherokee 4.0 sport this morning and as usual, I hear the 3 second chatter of the lifters, but this time it sounded like one was not pumping up correctly. I shut it down than started it back up, same thing. That one lifter noise soon went away as the engine warmed up. When I got...

Hello all, I just finished up installing new bearings and seals on a 87 Dana 44 With 3:54 gears that I'm swapping into a 1994 xj with 3:07. Bought a dana 30 with the same gearing on Saturday that was being pulled from a 91 Cherokee. Just pulled the 30 off the truck this afternoon and discovered...

Hello All, I just recently purchased a 1994 Cherokee sport with the 4.0, ax15 4x4 with just 104,000 miles. Just Ran across a add in Craigslist for a Dana 44 out of a 1989 Cherokee. Is this indeed a true bolt in and go unit? Same everything. I've read it is,just have not personally confirmed. Greg.