Search results

I am going to try a energy suspension poly bushing and see where that leads. It seems nobody make a good aftermarket bar unless you have a minimum 2" lift. So I may add a 2-3" lift then get a nice adj bar to go with it. So coil spacers and add a leaf here I come. Id do a better lift but this...

does anyone here know of a good track bar for stock suspension??? Thanks fellas

Thank you Tim MN. is that the only option out there? Thanks again

What is available in aftermarket track-bars for stock suspension, but is a far superior unit?

Yes autozone track bar does have lifetime warranty, but id rather fix it right this time with a quality track bar so I dont have to put another one on in under 10k miles

Tires are new

The mounting holes and metal bolt hole in center of bushing are nice and round. No slop in bolt to hole clearance. Bushing looks OK in appearance. If you take a standard Phillips screwdriver and put it into the bushing the rubber is really weak and moves substantially. Mushy rubber. What is a...

The taper "tie rod" type end is fine and tight. The other end where it bolts to the axle with the rubber bushing is where all the movement is at.

Hey guys got an 88 cherokee limited 4x4 4.0 136,000 miles on it, stock suspention. have been dealing with DW for a while. Parts replaced, Trackbar, tires, upper and lower 4 link bushings, shocks. Alignment was just done tie rods and all other steering components seem to be in good shape(no...

I have 2 xj's First is 1988 4.0 auto 4x4 limited second is 1990 4.0 auto 4x4 limited I have done alot of searching of old posts and would like some help. The main item in question right now is are the alternators the same? (or will they bolt up and plug in) Second question is where can find, or...