Search results

My current set up is 1997 Cherokee, DPG 5" hybrid lift kit(RE Drop Brackets and w/ 4.5in ZJ lift coils), 33's, D30 with Aussie Locker, stock 8.25, AA SYE,... I got a line on a set of Dodge Ram 1500 set of axles, D44 and Chrysler 9.25 for $325 with rims and tires(stock). From what I read so...

97 cherokee, 4.0L, 147,XXX. 8/29/09 @ The Cliffs; I get myself stuck in this. i was a little deeper into the whole before this picture was taken. Water was up to the top of the passenger headlight. After getting it winched out, we motor back to the parking lot and I pull the dip stick and see...

Lift is DPG Offroad Hyrid 5" lift kit with 4" lift ZJ coils in front. But after the bumper and winch was installed and a few wheeling trips later, the front end sagged down. I dont wanna throw 2" coil spacers on but rather would go with full coils. i was wondering what you guys are running for...

97 Cherokee SE So today instead of going to the junkyard and getting more parts, I decided to throw the cluster in i had gotten from a previous trip there. Instrument cluster from a 00 Cherokee. I believe it was from a 00 cause i found in laying in a cherokee with a build date of 4/99 Note...

My Most recent mod Step One: take off factory flare Step Two: Mask off fender and hold up flare to fender and draw an outline of the bottom inside of the flare Step Three: Take fenders off of Jeep Step Four: Cut along the outline with a die grinder[or saws all] Step Five: Hold flare up...

Let the girlfriend take control of the Jeep for the day... http://www.youtube.com/watch?v=J2v0hyjY2x8

Ok, so a few of my friends and I took a trip to the local Pick N Pull and happened across this. Its a 98? Cherokee that had been stripped and a wierd Frame Installed, as well as the steering wheel swaped to the other side. As for the Roof and Upper half of the doors have been removed and...

I cashed my pinion seal on my D35, which lead to a loud squeeking sound for a few secs, then a howling noise on acceleration. So this yesterday morning I started to take it apart. I got the shafts and spiders out. the axle bearings by the drum brakes look good[no pitting or anything]. I didnt...

I got a set of tow hooks and brackets for a XJ. Should fit any year. I believe I got most of the hardware too. You will reuse most of the bolts that already hold the factory bumper on. Price: $60 OBO Location: Gurnee IL, Right by 6 Flags Great America. Contact me at...

Thanks to the SEARCH function, i was able to skim through threads and got some ideas... I was driving my Chero [cause I have it stored and just wanted to get the fluids all flowing] around a few days ago when it cut out on me while i was doin about 35. I pulled into the medum[sp], and it would...

I can get a Chysler 8.25 out of a early 90's SOA Dakota that has a LSD in it for free to swap out my D35. ABS light has been on for a while and I could care less about having ABS. I measured the insides of the springs on the Dakota and my Jeep and they were the same. Bolt pattern is the same...

A buddy of mine blew up his D35, so we went to the junkyard to see what we can find. I believe we found a D44. We cracked the cover off and counted the teeth. 43 on the ring and 14 on the pinion. Which is 3.07 which I believe they came with. 4.0L with 5spd. Chero also had all the factory armor...

I'm looking for a wire to splice into so that when my parking and/or head lights are on, it will trip a relay. Looking for a wire hopefully under the dash that is suitable. THANKS!

I'm looking to replace my valve cover on my 93 4.0L HO since its slightly leaking. Is there any other valve covers like these? Is there ones that have MOPAR written on them or anything on that order?

read this thread: http://www.gljt.org/modules.php?name=Forums&file=viewtopic&t=4715&highlight=newly+lifted Expectly the 9th? post with this part in it: "Think of the roof rack as a roof extension. When ever you come to a spot where you would have just made it by without damaage without a rack...

After cruising around town, I pulled into my friends house popped my hood, checked the coolant level in the bottle, and it was almost bone dry. Ran over to the gas station, got some Coolant, then went home and mixed it 50/50 and added it to my resivour[sp]. To keep this from happening again, I...

Somewhere there is another thread on this but I couldnt find it. I had the problem of the welded round nut breaking free of the weld. Bolt and nut on the left. I got a Vice-Grips on it but the round nut just spun inside the Vice-Grips. SO that wasnt working. I read on that other thread that...

Its amazing what you'll find on ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6281&item=4551285974&rd=1

I got a set of these for my Bilstiens. My question is: Is there any rubber insulator thats needed for theses like the stock stem style had? WebSite = http://www.jksmfg.com/shock_conversions.htm I would like to get a 2 peices of compressable rubber, cut them into doughnuts and would fit on the...

I installed new front[frame to caliper] and rear[frame to axle]. In the process i kinked both rear lines that go to the wheels. So those need to be replaced. All the brake fluild leaked out of the entire system. Theres no fluid in the master cylinder. its all on the ground :( So, my question is...