Search results

My CTS shows infinite resistence. Total open... Gonna go get one tomorrow, and then see if i can pass the CA SMOG TEST in Folsom, CA.

Dang, that is a stumper for sure !!! What is the fuel pressure in PSi at 2500 RPM? Also, When you take the cap off the distributador, and wiggle the rotor, does it have about 1/4 inch of play in it???

Sooo.... I know this means i am a bit late to the 'CTS party, but here goes nuthin'.. On the 91 to 95 versions that I have owned, the CTS or Coolant Temp Sensor that throws a code 22 is on the front of the head in the thermostat housing. That is the big dog for smog ! The little one on the...

Good rods and good pistons are almost priceless !!! You just never will regret paying for some forged rods with the H-beam design and good pistons wit full-float wrist pins. You are on the right track... Made in the USA rules ! I skip full lunch every day and just eat 2 oranges at my desk...

Soooo, I put a reman head on the '95 Country 4.0, and noticed the intake runners were all dirty inside. 5 of them were real brown, and the number 5 runner was dirty brown too, but very shiney clean on the bottom of the runner right under the fuel injector... Is that the sign of a leaky...

Re: What was done to YOUR rig today MECHANICALY???? Just changed my cylinder head, and the 95 XJ Country no longer blows steam out the exhaust pipe !!! Sounds real smooth, so I am gonna drive her to work in the morning! Best $800.00 dollar jeep i evah had... PS... Your Jeep won't start if you...

OK... Go buy a Cherry-Bomb glass-pack, and clamp that on as the new muffler. It just sounds so perfect on the old inline-6. You will have high-school flashbacks, and all the hotty soccer-moms will dig your ride !!! Just do it.... ;)

Awesome !!! I appreciate the info, and the dial-bore indicator that i just borrowed says you are right. This is be my first inline-6 Stoker Motor, and it should clean up just perfect at 0.030" oversize. Gonna go with the good rods, the offset ground crank, and a re-man head from Sacramento...

Howdy, Just pulled the cracked head off my 1995 XJ Country, and it seems to have some numbers on the top of each cast piston. The number 50 looks to be cast into the top of each piston, with an arrow, and "FRNT"... Is this a stock 1995 4.0 piston, or is it oversize, or is it just a big fan...

... Started to take the head off so I can change the Head Gasket....

Dang.... This is good stuff. My (new) 1995 Country XJ does not hold fuel pressure after i shut it down... i take the cap off the "Schrader Valve" on the fuel rail, and when I press the valve, it just dribbles.... Sounds like we need to replace the old fuel pressure reg... Favorite quote of...

Seems like the new heads from Clearwater Cylinder Head and Alabama Cylinder Head are the way to go... Does anyone have one installed and running... Any reviews in 2011 ???

Well, just order up a new Fel-pro head gasket, and pull that head off. I'll bet you just blew the gasket between 3 & 4... Pretty common, and I have see it 4 times now.

The Ford 9" is what they use in NASCAR !!! Super strong, and lots of trick parts available .... Just do it !

I have installed a used set of Deaver leafs, and they work great. Had a set of Rough Country 4.5 on my old '89, and they were good too, but very stiff... The used Deaver springs give that big-Caddy ride, and great flex.

WOW !!! Gotta go check my fuse-box.... My Jeep Tip=Tronic condition may be fixed with a 10-amp fuse??? Awesome !!!

Broke my Harbor Freight China-Boy winch on the top of Mt. Tenabo, and it was a real mess getting the Jeep back to the ranch. Saved up and purchased the WARN winch, and now i sleep better. Don't buy that Rice-Boy crap, just save up and get the Big-Boy WARN winch, and then you have the best...

One of the best mods i have seen on a Jeep rebuild is to deck the block, make the pistons come up closer to the head, and boost the compression. Not really sure what the limit is on this, but I suspect it may be much like a 292 cubic inch chevy 6, and on those, we run the cold static quench at...

Awesome !!! Those links are a big help. Thanks.