Search results

I'm running high misalignment spacers on my ruffstuff heims, and my lowers are ballistic joints... I think I'm all set. Thank you RCP and goatman for helping educate me on what the proper thing to do was. This is my first 3 link build and if I ever do a second I at least some knowledge of what...

my upper link heims. I used 7/8 heims and I thought it seemed cheaper/easier to do it that way. thanks fopr clearing this up for me.

yeah, Ive found what the torque specs are, 3/4 is something like 360 ft lbs. Are you suggesting I torque my 3/4 " bolts to 360 ft lbs? And arent you the guy doing leaf springs with d60's on 33's?

I got all my links back from the powder coater and I'm gonna start final assembly on my mid arm 3 link. I was looking for some advice on how tight to make all of my bolts. I'm using 9/16 5/8 and 3/4 diameter bolts all grade 8 (of coarse). I was thinking of torquing them all down to 100 ft lbs...

a couple guys I wheel with bought the xrc8 from winchdepot.com and bought the lifetime warranty for like $20 extra. If it breaks return it and get a new one.

If cost is a concern.... I would go with which ever one is less expensive. you are over thinking it. either one of these stiffeners will be a ton better than what you currently have. I personally went with the ruff stuff stiffeners, they were on sale around xmas and a %10 discount got them...

we have had this jeep since it was new, and theres not much aftermarket stuff on it. Just the stereo, but when I pull the radio fuse it doesn't change the test light. I'll start pulling out and disconnecting the door switches. I'm confident that there is nothing wrong with the battery, since the...

can anyone offer any type of help?

So I'm in the process of building my wifes old 2001 cherokee. After leaving it sit for about 2 days the battery is to dead to start and about 4 days it is completely dead. I got out my test light and disconnected the negative battery cable and started pulling fuses under the hood. I pulled one...