Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
98 XJ 4.0 HO. The camshaft position sensor has three wires on the module coming out from the distributor. Tan/Yel goes to the ECU, cavity A18. ORG wire goes out into the wiring harness and several sensors and looks like it is the +5V supply line for 3-wire sensors. My question regards the...
My restoration project continues. I have most of the lights working, although I found some old crumbly lamp sockets that have to be replaced. However as I progressed, I got the turn signals to work, but the hazard flashers won't. Don't they use the same bulb filament in the 3157 bulbs...
98 Cherokee Sport, 4.0L. All of my power windows work from the driver's control panel, but none work from the individual door panels. Yea, I've tried the window lock button in every configuration possible. Am I missing a fuse somewhere or do these develop shorts in the door panel controllers...
Who's parting out a 98-ish XJ with 4.0? I need the harness plug that plugs into the oil pressure gauge sending unit (above the stock oil filter) and as much of the wire length as you can pull out of the wiring harness that belongs to it. Needs to be in good condition. My harness connector is...
Huh, my rear liftgate won't open. I can hear the lock cycling when you insert the key, but it will not open (even barely) when you try to open it from the outside. Any suggested ideas to get it open so I can pull the rear inside door panel off and check over the lock mechanism and alignment...
I picked up a '98 Cherokee awhile back for pennies (of course) as it's a salvage title. The vehicle had been in a front end dinger popping both airbags. The previous owner replaced all the sheet metal (now it has a '93 front end) but it will not start. I have the ATX and 4.0L HO engine, 4x4...