Search results

Yeah, I havent cracked my 0331 head yet as far as I know. Knock on wood. My coolant has always been a disgusting brown with lots of sediment. I suspect this is mostly because of block rust, but who knows it may be cracked.

Hey guys, I've had my 2000 XJ for quite a while now, 4 years and almost 50k miles. Its always been down on power compared to other XJ's. I put on a Spectre cowl intake, full 2.5 exhaust, 2.5 High Flow cat, 62mm throttle body, injectors, as well as doing plugs to make sure there's no issues...

Anyone have any experience with the CNC throttle bodies from Jeepers and Creepers? Going to upgrade soon and at 169 for a CNC throttle body seems like a good deal. http://www.jeepersandcreepers.com/13601.html

Thanks for the input. 245's it is.

Hey guys, I've got a 2000 XJ with a coil spring spacer and a shackle with some aftermarket upcountry leafs. I'm running TJ moab rims with the stock 245/75/16 MTR's. Theyre getting a bit beat and have zero siping so I'm looking to upgrade to a set of Duratrac's for this shitty NE weather. I dont...

Good call on the terminals, I try to go after the cheapest thing first and thats what it was. Thanks guys!

when I did my headlight harness upgrade a few weeks ago i cleaned, and reseated cables. I may pick up another end and replace that before i go trying to replace the whole starting system.

The only thing that has me thoroughly sketched out is that the ignition wont come back on immediately after i turn the ignition and all the guages are dead. For about 30 seconds.

Hey guys, yesterday out of nowhere my 2000 XJ wouldnt start. There's just a relay that clicks then the dash dies when you hit the ignition and the dash wont come back on for 30 seconds. Battery gets no load. Any ideas? The ignition has been questionable latley. The key has been pulling out...

I'll keep that in mind, Correct me if im wrong but you can only put 4.55's in an 8.25 right? Like i said i figured with the price of the axel its worth me building it. Anyone got a link to a write up about setting up gears and a basic rebuild? All the places i've been calling locally seems to...

Scored this XJ d44 for 240 the other night! Planning on building it to replace my 8.25 when i go to long arm 4.5 and 35's Whats the most economical build route? I'm thinking 4.56's with the 35's and some sort of selectable locker maybe shafts. Lots of people have been telling me to build the...

Well thanks for the help guys. How do you adjust the tension on the belt? Belt is 2 years old. Maybe 20000 miles.

I would agree with this, but it does it pretty much within the first minute of me starting it. Doesn't have to be the first start either itll do it on the 2nd third 4th start. Sometimes 30 seconds after its started sometimes not. It does lock up because i'll loose power steering, and the voltage...

I'm getting an intermittent noise from my ac compressor since I've owned my 00 xj 40k happy miles 140k on the jeep. Basically when you hop in the jeep turn the ac on it'll squeal. Turn the hvac off and back on it goes away and stays away until you start the jeep and do it all over. Yesterday and...

i just had the same issues, replaced evertyhing but the rad. finally broke down and did it. Just got an advance auto parts special for like 89 dollars. Cant beat that and its got a lifetime warrantee Make sure you have disconnect tools for the tranny cooler, that one caught me offguard.

Radiator has been completely flushed in the last 3000 miles. im starting to suspect its the head. However, it doesnt eat coolant. It always has kinda run rough.

I've had it with my 00 XJ. I've replaced water pump, flushed the radiatior due to sludge, replaced t-stat, and finally today installed a ZJ fan clutch. Still overheats if you let it sit more than a 2 minutes with out moving. As soon as you drive it drops to normal temps. Coolant is a gross brown...

located in Louisville KY taken ab a year ago but nothing has changed

Hey guys, I'm selling my bone stock 2001 XJ classic. Its an auto, 231. 126000 miles and very clean. There is a small dent on the pass front fender. What should i be asking for it? Just got water pump and heater core replaced last year. Thanks guys! I'm sad to have to sell my XJ but im going to...

Tranny cooler will be done also, its just cheap insurence. I'm really interested in those tube fenders. Do they come complete ready to screw/blot on or do they need to be fabbed with sheet metal?