Search results

Since I don't have a photo handy, in the FSM it's page 24-38, figure 43, and they call it a "flag retainer receptacle" not a bracket.

Update and another question. Using a pry bar I finally got the brackets broken free, although the plastic around the pin on the drivers side shattered. Hopefully the other bolts and such will be sufficient to hold it up when I put it back together. The question: It turns out the 98 has the...

So I'm doing the dreaded heater and AC evap core replacement, and I'm running into some issues that I can't seem to find detailed info about. First - how to "drop" the steering wheel without removing it. I tried removing the two nuts from the vertical bolts, and the wheel dropped down...

dalitton , if you are still around- how did you solve this? looks like I'm having the same problem. And did you take out any other bolts to drop the column down?

It's an interesting idea, but I don't think so. We also "customized" the mounting brackets on the bumper, and the C-Rok already did the mounting thing a bit differently from most tire carrier bumpers. the hassle of trying to duplicate the mount setup on a different bumper would exceed my...

I have a custom rear tire carrier bumper that was constructed on a base of a C-Rok 4x4 bumper. It was rebuilt to move the tire down and to the drivers side for visibility, and with a tray to hold two Scepter-size jerry cans. For various reasons, I want to do the rear lower quarter panel...

Busted the other welded BPE last week. Still want a hoop, but at this point I'd settle for a used JKS mount. Anybody got anything they want to sell?

Um, no. I already did this: http://www.lunghd.com/Tech_Articles/Suspension_Steering_Axles_and_Brakes/Rear_BPEs.htm but welded them on, which is what broke. I don't want to cut into my floor to get the old broken bolt ends out. I just want a hoop. Like this...

Looking for a shock hoop. Cross Enterprises or similar, or a homebrew. NOT anything that mounts to the standard upper location (i.e. no JKS). Busted off a welded-on bar pin eliminator this past Friday and I want something different. Do NOT want to cut the floor open though, this is an expo rig...

wayback machine does not store pics, either. Did anyone happen to save the photos?

Looked just now in daylight and from the trail of drippage it looks pretty clearly to be coming from the top of the tank. O ring gasket I suppose. I'll see about nursing this home.

This trip is turning out to be kind of a mess. I fixed the popping - in searching for more things to tighten I discovered a motor mount bolt with a nut that fell apart in my hand. I got a new nut on it, and all pops stopped. However, now the thing has started leaking gas every time I fill up...

Before I posted up originally, I'd cranked the heck out of my track bar frame side bracket bolts. This morning I tightened up all the steering box bolts (I have the JCR steel spacer and an ORFab front bumper with the steering area brace, so if it's cracked it still ought to hold together!). I am...

Hello Colorado folks, My mom & I are in Cortez and something in the drivers side front end right under my feet is popping like crazy. It started after a bad stretch of potholes on I40 in Oklahoma. I tightened all my track bar bolts and such two days ago in Santa Fe, but that didn't fix it...

I'm heading out the "not quite I-40" route for spring break and from what I can tell that route stands to be way more interesting than 80 or 70. Cottontail mentioned some of them - Nashville, Memphis, Hot Springs (which is a little off 40) - there's also Palo Duro Canyon in Texas, the Talimena...

Turns out it was the starter. It tested in a bench tester as OK because it did activate and kick the gear properly for startup, but after startup the small center gear that is supposed to retract was not staying retracted. We traded out the starter (after some discussion with the parts...

If the 99 still uses the multicolored vacuum hoses to run the heater controls, I could use everything from the control head back to the firewall... send me a price shipped to 27704 (if you got & will ship). Thanks.

Put starter back in. Bolts were correct the first time. Noise is still happening. Can anyone tell me about shims?

Ok so I found this: http://www.cherokeeforum.com/f2/jeep-4-0-starter-bolts-187635/ so I think the bolts were actually in the right place... so can anybody tell me about shims? Where would they go and what would they look like? I can put the starter back in tonight but I don't have enough light...

Just got back from Auto Zone, they bench tested it and it tests as perfectly good. Now if I can figure out which bolt goes where, I can put it back and see if the noise still happens. If it IS still happening, if I'm understanding correctly, it's either needing shims or has loose flywheel...