Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Thanks man. I got the t case and trans mounted. Got the t case shifters set up and started working on the new crossmember. Next time I'm home I should be able to finish up the x member and fill in the hole in the trans tunnel and get the seat remounted. I'm going to try to make the filler piece...
[/URL][/IMG]
Quite possibly the easiest way to install a t case.
[/URL][/IMG]
[/URL][/IMG]
Best pic of the cowl bar. I'm very happy with it. 7 bends with 2 different benders.
[/URL][/IMG]
Little pic from the rear of the b pillar.
[/URL][/IMG]
Quite possibly the easiest way to install a t case.
[/URL][/IMG]
[/URL][/IMG]
Best pic of the cowl bar. I'm very happy with it. 7 bends with 2 different benders.
[/URL][/IMG]
Little pic from the rear of the b pillar.
It's been awhile so here's an update for ya. Got the cage finished up. There may be a few small additions down the road but for now. Picked up a stak 3 speed monster box and I didn't think to check the shaft length and snapped a piece of the transfercase adapter. I have another one on order. I...
I had the front housing custom built for 78-79 f350 inner shafts. I sent the inner shafts to diamond axle and they welded the inner c's on and I did all the brackets, link mounts and ram mount. It's literally a Franken axle. Thanks man.
Sorry it's been so long. I got laid off and we all know how that goes. But here's what's been happening since. I decided to keep the coil springs and leave the front end where it was at. I also started working on my hybrid cage. Built a center consul with way too many switches. Stuffed some...
So I started a build thread about a year/ year and a half ago about my 609 and 13 bolt build over in advanced fab. Which was probably going to escalate into an entire build thread but after I got laid off, money got tight and I haven't quite gotten around to getting my red letters back. But I...
Just ordered my coilovers. I'm getting some king 14in 2.0s. Spring weight will be 250/300 and valving will be 15/10. I've also decided to go full hydro and the front axle will be getting pushed forward a few inches. I've also started on my hybrid cage so there should be some real progress in a...
I've ran bilstien and I like them I'm in the process to swapping to coilovers up front and I'll be going with kings. (Great tech support btw). I was able to fit 12s on 6.5in of lift but if you go that rout and get the shock mount conversion I'm gonna highly suggest looking into the short bodies...
So I figure it's time for an update
Started throwing the front end together and put it under the jeep aaaaand.... my Trac bar will be a full foot shorter than my drag link because of the coil springs. So I'm going to coilovers. But I also just got the news I'm getting laid off so unless someone...