Search results

..wondering if all the XJ model years,.. front driveshafts are the same length-Have recently gotten some erroneous and possible mis-leading information-TIA bxj

Needing to locate some 3-link components and possible vendors-Does anybody here at the NAXJA forums know whose product this is or where I can find this 3-link driver's side frame mount bracket or something similiar and or if this 3-link driver's side upper arm can be purchased...

Looking for a smooth and decent ride went useing the XJ on the streets and I am presently in the process of assembling some DOM longarms and looking at purchaseing the axle end components-Also have been advised that I will need some type of shock preventing rubber or polyurethane...

I have found some old homebrew longarms plans Long Arms ---------------------- 6' of 2"x.25" DOM tube = $60 Treaded tube adapter part # PP-TA15 = $16 x 2 @  HYPERLINK "http://www.polyperformance.com/tube_adapters.htm"
http://www.polyperformance.com/tube_adapters.htm Machining to turn...

First of all I want to thank whomever I got this idea and foto from and was wondering if anyone here at the NAXJA forum knew who makes this item and if this driver's side 3-link component and frame mount ONLY is available for sale-If anyone can add any additional details or suggestions...

..good ideal or ,..? Have some spare pieces of 3" X 3" inch 3/8" wall tubeing and was thinking of fabricating up homebrew custom drop brackets in these slow economic times-Also how does everyone feel about haveing/useing a three-link for their daily driver-Will there be a greater risk or...

In the process of modifying an older 86 XJ and have installed a 3.4 liter engine with a carburetor hooked up to a aftermarket fuel regulator on the firewall routed though OEM metal main and return lines with the stock internal electric fuel pump-I'm encountering two problems,first there seems...

Have a good deal on a surplus XJ carpet from a recent junkyard find-Was wondering if anyone knew if a carpet from a 2000 XJ would fit my 1985 model-Understand vaguely that some carpets are two-piece and the rest are one piece ?-I'm hopeing /assumeing that most or all model years are somewhat...

...Ya just gotta love doing spring cleaning here in the Snow belt states..Glad to see Old Man Winter has gone but the last season's road salt has been somewhat devastating for my Cherokee-..Rust,....rust everywhere-The more carpet and rugs I seem to remove the more rust I am finding -Now I am...

Hi: Thinking of building or finishing up my 2"X6" tube crossmember to accomidate some longarms-Just wondering if anyone knew if RC sells only that nifty 3-link UCA setup for the driver's side ?-TIA bxj

Understand vaguely that those nice powered and electric leather Grand Cherokee front and rear seats will fit all model years of the XJ ?-Also how difficult of a time-frame removal and re- installation process is involved-Anyone have any advice or suggestions ?-TIA bxj

I have removed my old faulty and failed Bosch in-tank fuel pump on my 1996 XJ and was wondering if this new smaller size in-tank fuel pump would work-It seems like the bracketry on the old Bosch float gauge will not be correct for the new pump-Any advice or "work-around"...

Was just driveing along minding my own business this colorful fall season and the ole DD hit one or more of our wonderful local hard pot holes and later at home and in the driveway I noticed quite a large pooling of gasoline under the XJ -So here I'm in the market again after the second...

I am in the process of engine removal and the ole XJ is inoperative and was wondering what would be a good cleaning solvent to get the gunk out of my steering box -I am under the impression that something like Solvent Green could be applied-Also what would be a good rust remover other than that...

Hi: Does anyone have any DIY advice or comments on makeing up some hard lines for the XJ steering box and pump ?-I was thinking about replaceing the old OEM and aftermarket ones with the correct end fittings + 3/8"-inch hard lines and bubble flares-I have a surplus of hard brake lines and was...

I am thinking of replaceing or removeing the front header panel which has three metal screws attaching it on each side and where the OEM factory screws are attached and assembled from underneath inside the front wheel houseing-My question is does anyone have any tips or advice on how to go about...

Don't quite remember whom here posted the information or pictures and had the plans for a "re-enforced plate" for the rear bumper -Needing something stronger( 3/8"-flat backing plate? ) to go behind and re-enforce the stock thin sheet metal where the eight bolts(four per side) attach the rear...

Decided to do a weekend check-up of the ole XJ- Lo and behold the rear bumper was sorta loose.(I.shoulda left it alone,for a later time...) but being diligentt I contiued to see that the part was almost rusted away from all this midwestern salt that we have here during the winter months-The...

Thinking of undertakeing another metal working project with either steel or aluminum before the winter sets in-I'm thinking along the lines of something like a roof rack about 74'-inches or so long-Anyone here has any good designs or detailed diagram specifications they would like to share-PM...

Hi : Need a electrical refresher and some advice/comments etc- I have the engine completely removed and have finished some re-wireing under the hood -I am thinking of doing a quick test of the system by hooking up the ol 12 volt battery-Was wondering if I ground the end of the negative battery...