Search results

Can anyone tell what happened here? I had this HP D30 geared to 4.56 from stock. They installed a Spartan. I don't like the lunchbox upfront, steering. So I strip it down to install an air locker. But, this is what I see with shaving in the oil. There's no movement in and out and while I didn't...

I live in North East Ohio...term Rust Belt applies. Got the HD stiffeners installed, full set. Perimeter is stitched, rosettes filled. I used Weld Thru on the Stiffeners and some on the cleaned to bare metal frame rails. I sanded the primer off the areas to weld on the frame rails, didn't like...

I've got 2k Black XJ that I've owned since new. She's bruised and battered. NJ and Ohio salts have eaten the rockers and part of the driver's front floor pan. I've done allot over the years, new radiator, water pump, typical stuff besides what listed in the sig below. I'm on the fence now, try...

What do you guys think of this kit? http://cavfab.com/CavFab-Jeep-Cherokee-XJ-3-Link_p_61.html

Anyone know where to get a decent replacement front seat? The one I have is terrible.

For those who have 2x6 rockers, how do tie them into the frame rails. I'm plating mine with HD's stiffeners. I really don't want to cut into the floor if I don't have to. I have AJ's Rock rails, so I could just replace the rockers with a set I bought awhile back and re-use those but I though...

Does anyone make a kit for these? I'm just learning how to weld so fabbing them up is not quite in my skill set yet. HD doesn't make his kit anymore, he doesn't have the jig. Only other thing I've seen is Olympic's Top Hat, but it's a pretty big ticket and I don't want a basket, only have a...

Anyone have any experience with this kit? I'm starting a new building build and want to get away from the control arm drops I have in my current one.

I've been out of the modding loop for a few year. My beloved XJ is pretty chewed up with rust stemming from Jersey and Ohio winters. I was going to try to cut out the rot and save her, I had it since new in late '99. I bought some 2x6 tubes and other steel to fix the rockers but welding is...

Gotta allot of work to do on my XJ. Rockers are rusted, adding 2x6's; Adding stiffeners and finally going long arm. Been doing lots of research and settled on RK's 3 link. It's a few bucks but I've got JCR's TC skid and Skid Row's belly that I'll modify. I wanna know if anyone's running the...

My rockers are shot. Crumbling flakes of rust. My AJ's rock rails are in scraped but great shape. I wanna replace the rockers and keep the rails. They weren't cheap. If I go the tube method can I mount my pinch weld/frame rail mount guards to them? Would that be better than just replacing the...

I'm regearing to 4.56 and I'm moving up in tire size to 33's. With 4.5 inches of lift and relocated flares I'm trying to figure out proper backspacing. I've got Warn's hub conversion up front that put the wheels out about 3/4". I'll probably get spacers to even it out. I just can figure the...

I installed RC's drop brackets this week and added an inch to the 4 1/2" or so to my lift. Problem is to keep the pinion angle good I had to increase the length of my lower arms, uppers are in as far as they'll go. So now the axle's moved forward some and the sway bar's going to hit the springs...

Just installed RC's shackle relocators and found the shield that protects the fuel filler hose to the tank is rusted out. Local yards don't have one. Any body know where I could pick one up?

I'm at 4 1/2" running JKS uppers and RC solid lowers. I'm well armored with Skid row's belly pan and full width frame rail to rail case skid. Thing is, my ride is crap. I have RC's drop brackets in box but to make them work I'd JKS's lower arms at around $340.00. For about 300 more it's RC's...