Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Does anybody know what year valvebodies can be fitted to 95 Aw4. I have noticed that the check ball placement diagram in my 95 FSM lines up with the 96 model in the ATSG diagram not the 95. I have just had a shop fit another valvebody of unknown year and now it is slamming into reverse which...
Ok so I should be good if I change the extension housing and reluctor ring and sensor off my 95 and put it on the 98.
The pin outs on my 95 plug makes reference to 4WD sense which I assume gos nowhere as the 4WD switch is on the T-case. Is this correct?
Cavity 1 is 4WD Sense and it has a...
Thanks for the reply. I wonder why I nolonger get emails to alert me to new posts on my threads. I have checked my email in NAXJA.
Sent from my SM-N960F using Tapatalk
I have a 95 XJ and am thinking of swapping in a 98 AW4.
From the write up at beginning of this thread it says that a change to the t-case input gear is required.
"1998-2001 AW4s require more work. All the transfer case input gear info from 1990.5-1997 applies, on top of that, the sensors...
My ODB1 Actron doesn't seem to read fuel trim correctly. Did the factory DRB2 scan tool read fuel trim. I was interested to see if my cracked headers were affecting the fuel trim.
Sent from my SM-N960F using Tapatalk
Teeth in the pitman arm were torn off because it came loose even though the stubbie shaft was still tight on the thread and the red loctite was still intact. Its like the pitman arm stretched but if it is continuing to stretch it should be pulling through which it doesn't seem to be doing yet...
That's what came off. I used another 2nd hand pitman arm.
When I refitted the 2nd hand pitman arm I turned the steering wheel left to right with tyres on the ground and then retightened the stubbie shaft. I did this 10 times before it seated down.
Sent from my SM-N960F using Tapatalk
I put the stubbie shaft on tight and used red loctite on the thread only to have the pitman arm come loose while the stubbie shaft was still tight on the thread. I have tried a new spring washer and am currently using a Nord Lock Washer. Yes using Synergy steering linkage which bolts into the...
I have one of these and I can't keep the stubbie shaft that screws onto the sector shaft tight. I am using a torque wrench and check it frequently. I am wondering if the bearing on the bottom of the stubbie shaft is putting force on it and causing it to come loose. I have a 4.5" lift with...
I have destroyed 2 brand new MTZs in the last 6 months because clay got under the bead causing the tire to go flat. I didn't notice and continued to drive on it which ripped up the bead. I was thinking if I had an alarm to tell me when the tire was flat I could have saved myself a couple of...
Good question. I have never really needed a scanner but thought it might be handy. The Actron 9690 will read codes and read live data but I am not sure whether it would be of much value given that my Jeep is obd1 and is pretty simple.
Sent from my SM-N960F using Tapatalk
I would like to check what email address I have in my profile. When I try to change it I get a message stating that the email address doesn't exist?
Sent from my SM-N960F using Tapatalk