Search results

I'm parting out my 96 XJ. Below is the list of whats for sale. Any other parts that you are interested in, that are not listed please ask. 4.0 Engine $325 200,000+ miles Compression test done, all cylinders at 120PSI +/- 5PSI Leak down test performed, all cylinders under 10% leakage The engine...

Im going to be installing a PSC Ram assist kit. Its going on my Dana 30. If I reinforce the steering stabilizer bracket, can I use that to mount the ram? Im not concerned about strength on the bracket because I'm going to reinforce it, what I am concerned about is will the ram bind up. Im also...

I have 3 GoodYear MTR 33" tires with about 40-50% tread left and 4 Mickey Thompson Classic Lock wheels. Lock ring has some rock rash. $500 gets everything.

I mangled the hell out of my stock bumper and lights this past weekend at Rausch. I have been wanting to buy a winch bumper for sometime. So whoever is selling something let me know.

I need to replace my E-Brake cables. I have roughly 5" of lift in the back. My XJ is a 96 however I swapped in a 97+ center console and changed out the E-Brake handle. So I need e-Brake cables for the 97+ years. I know YJ cables are longer than the stock XJ cables but that would be for older...

I'm having trouble deciding which way I should go with upgrading my engine. For starters my engine runs fine but it's tired and has a lot of carbon build up. So it could use some attention. The original plan was to get a new cylinder head (which I did) and my brother (outlander560) was going to...

This past winter my brother and I installed some new suspension parts which included a rear 4.5" leaf pack I got from Clayton. After a couple of days my rear end was sagging pretty bad. The leafs didn't have much arch to them. I didn't bother to call Clayton about it because I had already had...

I need some kind of rocker protection and front recovery point. So if you have tow hooks and brackets or any kind of cheap recovery point I can bolt, weld or hot glue to my front I need it. I need these for Rocktoberfest!

My bro has a clean WJ head. The head on my XJ needs some TLC so I would like to build up this head and do a swap but not sure if its comparable.

I picked up the Mopar OEM dashboard clock from an 88 XJ I found at the junkyard. I want to try and get it to work in my 96 but unfortunately the wiring harness isn't there on the 96, or at least I can't find it. There is a whole harness coming out of the clock, anyone have any suggestions as to...

Looking to replace my Powertrax lunch box with a full case Detroit Locker

So i have been through at least 4 Steering gears and pumps because they have been all remaned from NAPA or Advanced Auto. Tired of that. So if anyone is parting out an XJ and they have a working Steering Gear and Pump let me know i WANT IT

Im doing a center console swap in my 96 and i need a few things. I need the late model brackets to go with the new console and also I need the bezel for the manual shift boot. The console I was able to get was the dark grey (charcoal) if anyone has a light grey version to match the 96 light...

hey everyone, My brother and I are re-gearing the D30's on our XJ's and we could use some help. We are both learning as we go and we have hit a wall when it comes to re-gearing. He has a HP D30 that needs 4.88 gears and I need 4.56. We picked up our rear axles and they were already geared. One...

in my 96 XJ I have had to replace the Heater Core valve twice already and now the 3 one is leaking again. the part is crap because its plastic. is there an all metal replacement I can get or a way to bypass it?

I need a driver side wiring harness for a 96 XJ with power windows and door locks. This would be both the large black connector and the small red connector.

I'm looking for a dark grey seat with bracket and hardware for a 98 XJ.

this is my DD so I use the AC when the heat if unbearable. we have had a heat wave punch us in the face this past week and I was running my AC. Before this week I wasn't having any problems but now starting is becoming difficult. here is what is happening: while the AC is running the volts are...

My bro is replacing the radiator in his heep. It's a 2001 with the AW4 tranny. I have only ever worked on a manual jeep that didn't have tranny lines going into the radiator. My question is how the he'll do you get off the pressure line on the bottom? And how bad is it if he cut it off with...

right now i have a D35 which is shimmed and a T-case drop. Im getting ready to put in a 8.25 and SYE with CV driveshaft and I was under the impression that I didn't need to shim the axle. my brother told me I need to put in a 6 degree shim though. is this right? I though the yokes needed to be...