Search results

Looking for opinion on the subject. I have a 93 cherokee with 304000 on the original motor. It has blow by and the head gasket just took a crap. What does everyone think i should do. Im looking at around 300 for checking the head out and parts and around 450/500 for a used motor from a yard...

Hi its been a while since I've been on the sight. I have a 00 xj and the past 2 weeks or so when I first start driving and apply the brakes the front brakes lock up. More the right front than the left. It only happens every once in a while but i can't seem to see any problems. the front brakes...

I have a 98 grand cherokee and the rear spring bushings are worn out. The dealer ship has 1 available the other is on backorder. They look the same is it possible to use the same one on both sides? the number I have is 52088379 from the dealer. Thanks for the info in advance.

This may sound dumb to some of you guys on here but I just picked up an 8.25 27 spline rear and want to know if I was to get a carrier and axles out of a 29 spline will bolt right in or are there differences, also will the ring gear fit on the other. Thanks for the answer in advance

Ok, I've read on hear and a few other sites that people are swapping out the heads on the newer motors for the older ones due to the overheating and cracking of the heads. I have a 00 xj and the motor came from a salvage yard and has a leaky head gasket so I just want to make the swap to the...

Hello this is driving me up a wall cause I cant figure it out. I have a 00 cherokee, 4.0l with aw4 trans and every now and then I have this high pitched squeal while driving it. When it happens and I hit the gas it goes away most of the time. today while driving it was there when I stopped so I...

Hello everyone just have a few questions for all of you. I have a 93 cherokee with 5.25 inches of lift right now but I want to do long arms and don't have a lot of money. my lift consist of rough country adjustable upper and lower arms,4.5 inch rough country coils, and a 1 inch spacer. I have...

Just wondering if anyone has used them and if so how do you like them. I may be in the market for a set but not sure if I want to spend the money on something that isn't going to help. I know some of the people on here are going to say buy another axle but I'd like to stay true to the stock jeep...

Just wonder if anyone has a write up on cutting and folding the rear quarters. I have tried running a search on this but could not find anything on this. Thanks for the info.

Well I have a 2000 xj that needed a motor when I bought it. I put a salvage yard motor in it and when I started driving it it would stall out of the blue.I talked to a few guys from dealerships and they said to replace the cps. I was also told to buy oem but didn't have the money for it so I...

Well I recently got a 00 cherokee with a blown motor and replace such said motor with a salvage motor and it runs fin but every now and then it stalls and doesn't kick the engine light on so I can't figure out what the problem is. I changed the plugs but all the sensors are from the salvage...

I recently bought a 00 xj with a Sony X/Plode cd player and while driving it seems like it faded in and out. It doesn't loose power but if fades and some times gets static.Today I bought a Clarion cd player and installed it today and it still has the same issues. If anyone has had this problem...

I have a 93 cherokee and the cargo area is rotting and has a few holes in. I have one that I cut from a junk one and I'm just going to patch the holes and then herculine it. I've seen on hear a few post that I can't seem to find in the search forum but in the back corners of the cargo are...

Well I just bought a 00 xj and the motor was blown so I bought one from a salvage yard out of the same year and when I put it in the is a shake. The other day I unbolted the torque converter to see if it was in the motor and there was nothing so I rebolted the converter and the shake was back so...

Just wondering whoi has done one and how hard is it. If you have done one do you have pics on what has to be done. I have an 88 with the renix in it and I also have a 93 that the floor is pretty rotted and I redid the front floor but the back is all messed up and I don't know if I want to...

I'm going to be installing a 4.5 lift but I'm piecing it together. My question is about shimming the lower control arms out to get the correct length. I have a set of Pro Comp lowers but they are only 16'' center to center and I'm being told they must be 16.5 long. I see that in my Cherokee now...

Wondering how to run the inake pipe for a home brew cowl intake? Does the pipe have to be straight or can it have a lot of bends? I'm making it out of that spectre intake stuff from autozone. Please help need advice. Thanks.

Well I have an 88 cherokee with vaccum disconnect and just swapped the axle shaft to a full lenght shaft instead of the disco. The shaft came out of a 92 and now it seems that after i tried the 4wd it hasn't come out all the way. While driving at slow speeds i hear a constant thump like its...

Hello everyone I was given a pro comp lift that was supposed to be a 3'' kit but It was an add a leaf and I'm putting together a Dakota bastard pack. My question is about the lower control arms that came with the kit, They are 16'' center to center and I'm wondering if that is going to enough...

I was talking to a guy who also has an xj and I was telling him I wanted to do a homemade snorkel on my 93 xj with abs and 4.0, and he told me that some people are running minivan airbox's. I've searched on here and can't seem to find anything so if anyone knows about this please tell me and if...