Search results

I have a guy here in gresham that will install gears if the axle is out of the rig for $130 each. he did mine and I have had no problems. He also does custom axle setups and disc brake conversions. He is my buddys father in law and has 25+ years experience. I would recomend him to anyone that...

I also have an AXIAL ax10 I bought mine used from craigslist with rear steer and the losi "boggers" then I ended up buying the Km2s, aluminum y link and putting bent links on and got rid of the straight ones plus alot more crap I too would be up for a RC get together I'm actually doing some yard...

I'm running the rusty's offroad long arms on my cherokee and love them. I have had zero problems with them and they have takin a beatin over the rocks. you can buy just the long arm upgrade for around $600 it consists of both lower and both upper control arms and the crossmember mayb a couple of...

Sorry to hear. I went through this not long ago so hear is the short story of what I did. go to or call and make an appt. to a meadeator at the court house ( probably not spelled right ) and they will write up the legal paperwork for FREE. It will help the process go faster if the two of you...

wow $22 for a shaft is cheap!!!! Do any of you know where I can find just the driver side inner and outer 297 shaft? I'll pay more than $22 but I live in the gresham/portland/sandy area. I dont mind a little drive but no more than 30 miles one way. I have not been able to locate one myself for a...

so I want to wheel real bad but I keep breaking the left front shaft right at the ears where the u-joint caps go in. I plan on going with a D44 front early next year so I need to try to make this D30 last a little longer. I can get a brand new inner and outer 297 shaft with u-joint for $105 or...

I'm interested!!!

SIGNED!!!

do any of you know about how much lift a spring over will give i thought about 4" and if it will need driveline work or mayb a t-case drop instead just curious a lady at work wants to lift her daughters jeep while she gone for a surprise and she asked if i could do it but i dont have all these...

thanks for the break down of the wiring I will deffinetly look for those wires and check them out. Is the starter relay that you mentioned silver in color and metal with 1 post and 3 spade terminals that a bunch of fusible links go to? I had some one helping me and I was checking for power both...

I had to remove the battery and all the wiring from the inner fender wells so I could cut and do the dovetail. I disconnected anything that would prevent me from getting the wiring out of the way of my work area I know that could go alot of different ways but I tag everything that I unplug. The...

the CPS is new along with MAP, IAC. and TPS I replaced those items when I replaced the head and upgraded cooling systems? what else do ya got?

so I almost have my dovetail project done I plugged my wiring harness back together hooked my grounds up made sure every thing was tight and clean now the POS won't start WTF:gonnablow!!! it turns over everything works but I have no power to my coil or fuel pump. i've checked my fuses and...

NICE!!! you gonna go rat rod or full resto? im also building a 77 f150 short bed with a 429 lowered on bags with 4 link almost full resto but still aways from being done i may have some parts that could be of use to you pm me if you need anything

no money for a full size spare no room either but i carry plugs patches valve stems and air these items wont fix everything but it's better than nothing

D44 front ARB 5.13's trussed ford 9" rear ARB 5.13's trussed and shaved if tax return allows then i'll also be getting 37's or 38's finish dovetail front finish half doors build new front and rear bumper's hopefully a cage ( need tubing bender ) also if tax return allows i've been thinking...

I have been running rusty's 4.5 springs for a little over a year now and I am very pleased with them the flex good and ride good I would just do a new spring pack.

is anybody open to the 17th or 18th so it could be on a weekend?

no pics yet but I will definetly take some and try to get them up I'm also narrowing the front and rear (dove tail) im going to try to use the stock radiator and not put headlights in just use my 7'' hellas for headlights tonight I'll be making my first cuts hope it all works out

I'm doing this swap right now and I'm using a HP44 and HP9'' out of a 77 F150 just curious what years are most desirable for this swap? it might be too late for me but good advice for the next person that does this