Search results

One used Rusty's (XJ) Air Tube and filter. Tube was drilled for the IAT sensor, currently plugged with a manifold fitting, orange goop is copper RTV. Used this for maybe a year, filter is dirty but undamaged. On my junk (IAT not included) $35 + shipping? Thanks, hub

Bought some extra sets when they were on clearance. New, out of box only to verify contents and condition. Check your local WalMart first. $18/set + shipping. $11/set + shipping Paypal preferred. Shipping has been in the $12 to $20 range, per set, depending on location. UPS ground, insured...

This is Grimm's junk, not mine, but I couldn't find another pic of the side of an AW4. In the red circle. Doing a drain-n-fill on my junk today, and I noticed this bolt. It's a pretty large Torx bolt, just forward of the outgoing quick disco, right under the dipstick tube. I'm looking to add a...

Any particular place (sponsor or Jeep-friendly vendor preferably) I should be looking for a speedo gear? I saw "PartsMike" recommended in an older thread, and Morris and the dealerships mentioned, but the latter jacked their prices up. I think most people are probably selling Crown gears these...

4 caps, part number 52059583AA, as seen on TJ 15" and KJ 16" steel wheels. Used, but in very good condition. Bought these a week ago, but I'm trying to buy some alloys instead. Looking to break even at $30 shipped. Paypal/cash preferred. Thanks, Chris

Bridgestone Dueler AT Revos, 245/75/16, Load Range E. Approximately 1/4" tread (varies between 7 and 9/32s in the center), don't see any plugs or patches, no rash, no cracking- very good shape for their age, build stamps of late 03/early 04. Two have some feathering on the outer row of blocks-...

What size are the bolts that secure the front sway bar brackets to the unibody? I need to grab some hardware in the morning for a couple of Jeep projects, but all I've come up with is the part number- 3420 1540. I think it's M12, but I don't know the thread size, or even if it's M12. I've...

Pics of all items here- [if you can't view this album, let me know. Pbucket is flaky for me today]. http://s266.photobucket.com/albums/ii244/AHhub/Jeep%20stuff%20for%20sale/?start=0 Dark gray leather buckets from a 97 ZJ Limited. Complete with bases, switches, etc. $60 gets both buckets and...

Any interest in something like this? These are kind of the ugly stepkids of tech threads- I'm sure the mods would like another subforum to patrol, but they are common topics/problems for a lot of folks. Does anyone think it worthy of a dedicated area?

The local speed shop is long gone, and I'm wondering if anyone knows of a good shop in the Central IN area (or even close to the area) for headwork, rebuilds, etc. Toying with idea of a very basic stroker, or at least a little finessing of the stock motor. Anyone know of a shop that could build...

Really? Not even a link to the original threads? All that tech for noobs, that they can't see? Just noticed this today, seems a little odd to me. Curious about the reasoning behind this is all.

Looking for two pairs- ideally, one pair of 3/4" to 1", another of 1-3/4". MJ shackles en route for my junk, and we're going to try a BP on my friend's junk. He's trying to go as cheap as possible, and I just replaced my coils. Hoping to score some spacers to finish out both rigs. Thanks, Chris...

Does anyone have a part number for the MJ shackles? Are they dealer only, or are there any aftermarket (Crown, Omix, etc) manufacturers? I'm searching, but don't see much aside from lift shackles. I see that JKS makes a HD/"boomerang" type that appears to be similar in length, but aside from...

Rough Country Adjustable Shackles. Box has obviously been opened, but the shackles have never been used (hardware is still in the bag). Looking for $40 shipped in the lower 48. Paypal preferred. PM me if interested. Thanks, Chris

So I'm running down parts and prices to finally deal with my sloppy steering. I was floored when I started pricing new and rebuilt gearboxes(as high as $750!! for a stock XJ?!). Started chasing part numbers and prices, and noticed that Advance (Cardone rebuilt), and Autozone (Atsco rebuilt) list...

Anyone using one of these who has played around with the Xgauges, or figured out what it will (not) display? I've borrowed one to clear a code, and thought I'd mess with it a bit. Using the Xgauge function, I've figured out how to check the injector trim, but nothing useful otherwise (a flaky...

I've searched, and read, but what I've read doesn't mesh with what I'm seeing. I picked up a set of lug nuts, as I'm throwing some alloys on the Heep. My stock lugs are shedding their caps, and showing some wear on the seat from hamfisting. I've got the stock steelies with (I guess) standard...

Looking to replace my increasingly rusty steel wheels with some stock aluminum wheels. I found a set like these for cheap (60 for 5) a few hours away. I like this style of wheel, and I think with some decent paint they'd be much better than what I have now...

Just ran an errand in the Jeep, and saw my check gauge light on, and saw that my alternator was sitting on 9. Drove 5 minutes, came home, turned it off, then restarted. Needle jumps back up to ~14, no warning light. Now, it's been pouring rain here most of the night, and I've had this happen...

This would be for the MW Hoosier types- for a few months now, I've being passing a white/primer MJ on SR32 about once a week. I don't know if this is a shop or dealer or what (I know we have another Jeep shop in the area, R & R or something like that), but I haven't heard of these guys. Seems...