Search results

Ok I have finally had enough of my Renix crap, I bought a 91 Laredo and yes now I know now I should have bought a 93 or newer Sport and I wouldn't have these problems but this is what I have to work with. I am moving the entire underhood harness as well as the fuse box and what is required to...

Ok changed the CPS (crank position sensor) or as some people have called it on here the ping or knock sensor from another used motor I have and that seems to have fixed the problem......well I can hear a really weak knock still when I am revving it hard but it definitely does not sound like a...

No this is definitely not an injector, it is not a tick it is a "oh boy I hope that is a diesel otherwise that sound is just not right"! dj

Ok I pulled my badly abused 4.0l Renix (read heat seized 3 times in one afternoon and held mostly to the floor while mudding by my buddy who was the previous owner) out of my '88 last week as it had developed what sounded like a wrist pin knock under light load over 2000 rpm. So I put in a...

Yes you are correct, I have since found all that out. And actually last night I took apart a whole 2wd AW4 to see what was in there, and then actually found a complete service manual on them. http://www.scribd.com/doc/2922823/AW4-manual1 So I actually took the valve body out of mine while in...

Yeah maybe to the loose wire, I am thinking more the computer itself. 150:1 is for rockcrawling. As the guy who made my crawlbox, the "Foxbox" says "Regular low-range is so uncivilized". Dwayne

Ok here is the last year I used to have a problem that the day after wheeling when I would go to move the truck (usually the next day) I would have to really rev the hell out of it to get reverse, it seemed like it had air in the valve and of course the computer will not let you go until there...

Thanks everybody for all the information. Noticed after it was a passenger side drop as well, I guess it is the later models that have the drivers side drop. dj

I have a line on a set of waggy 44's I, I know the front's will install on an XJ with new perch's and other stuff but can you use the rear axle as well, I know that it is offset (for the quadratrac??) so I gather it is not really useable in an XJ? Thanks Dwayne