Search results

Axle made a loud "crunch" and shortly after I heard a noise whenever I unloaded the drive train such as coasting to a stop. As long as I had my foot on the gas I had heard nothing. This sounded like a pinion bearing to me but as I started to take the axle apart I found 3 bolts snapped off. I...

I need to change the fluid in the rear diff. It is an 8.25 equiped with a trac loc. Will I need to put that diff lube additive from the dealer? Thanks

After searching the board I have learned that I have a sticky lifter. 91 XJ 4.0L cold morning: starts Fine 30 seconds idling tick starts then begins to miss then about 2 min later clears right up. Tried the usual remedies: Flushing Early oil changes none have helped. Need more info on what's...

Got a good deal on a complete D30 axle with the right gear I needed, but after taking it apart I found mud and water inside plus it’s leaking fluid and there were no shims what so ever. In other words I have some work to do, before it goes into my driver. Also the hubs do not appear to be in...

well I read the posts on Acetone in your Gas, and I'm not one to try anything from the internet...but I tried this one. My results are good. Before the treatment, I would get 200 miles per tank, now (just 4 tank fulls later) I get better than 280 miles per tank, and that's in hotter weather...

91 cherokee 4 door with vent windows my trim is getting dry and cracked any one know a sorce for replacment?

2000 Chrysler 8.25 pinion nut what size is it? going to the store this afternoon also... when checking pinion drag...how much should you dissassemble do I need to take the carrier out?

are after market gears noisier than stock? I just upgraded my D35 to a C8.25 with trac-loc and 4:10 precision gears. No wine when under load, but a little when coasting, and more at slower speeds and coasting, also, when the axle was out I noticed it was harder to turn the pinion by hand...

what gear lube do I need for a chrysler 8.25 with a trak lok LSD? What lube should I use in the D30 up front? Thanks

I have a crysler 8.25 with a trak lock LSD that I'm about to install under my heep. What lube should I fill it with? What lube should I fill the front d-30 with? Thanks

Just one 30X9.5 AT off the rim makes a great full size spare. come and get it, just PM me.

Looking for a pair of Lower control arms from a WJ

I would like to do some mild wheeling in Slade Near natural Bridge, but I don't know where the trails are. Also does anyone want to go on Sept 18?

anyone going near Lexington any time soon?

what would a fair price to pay a shop to re-gear a front d30 in an xj?

need to re-gear my heap might as well get a whole unit if it's cheap, 4:10 is the target but 3:55 is nice too.

I Live in Lexington KY I just got MY 91 XJ locked and lifted and want to wheel but I don’t know which chapter I would go to. Most of my travel lead me north, (since I used to live in Toronto) What you recommend?

Question: I have a 91 XJ running 30”s on stock d35 with 3.55:1 and it will need to be replaced (long story involving deep water, you get the picture) A buddy of mine has a non clip d35 from an 87 yj. 1. will it bolt in or will it need modification, if so what kind of modification? 2. will I...

I have eliminated my Stock bendix ABS system, great mod, but... I am noticing that the back brakes do not engage as well as they used to. I have a D35 in the rear, the cylinders for the ABS are diferent than the Non ABS but I wuz wondering if anyone has a better improvment than just a stock set...