Search results

Re: Catch ya on the flip side Rest in peace Seth. Brad

I'm running DB's as well as Rusty's 8" coils on my DD with a decent ride. I am however going to build some long arms soon. Brad

Don't forget to use a center punch to get the hole started in the center of the shaft. I made a sleeve on the lathe that slip fit over the output shaft and was drilled .250 for a 1/4" center punch on the other end. Brad

The Pontiac Fiero's had the speakers in the seats. Brad

It never did bust off or pull out as it was only on there for a few miles. I made a longer threaded coupling w/ one of the RE super flex joints I had laying around. The springs are a little stiffer than my original set up but make the rear flex way better. Sorry no pics yet. I'm building a...

Me too. Rocks? Mud? Mileage? Clue us in bruddah! I am a dealer for Yokohama and have only sold one set of MT's. The damn truck see's pavement only. :tears: Brad

Can I buy 5 pounds?

33-1250's. I'm planning on keeping them until I get done swapping in a Dana 44 rear w/gears. I don't want to waste any money on the 35c that is currently in there. Yea, I have a 4.0. Freakin great engine! You guys don't need me to tell you though! :lecture: I will end up running a 35 or 36"...

Nice work! Gives it a new look with the rounded corners. If you get the time do a write up. I'm sure there would be a great deal of interest. Brad

Pics here. http://www.naxja.org/forum/showthread.php?p=471366#post471366

I had quite a few requests for pics of these so I decided to start a new thread. The free length was 23.5" and 21" weighted. That is with a stub bumper and no winch. Brad

I tighten mine down just to the point of having no slop. I'm running 7 joints in my front and haven't had to adjust any yet. I only have about 3500 miles on them. I can rock my LCA's by hand (torsionally) with the vehicle sitting and they don't make any noise or have any play when driving. Keep...

F1 paddles? It can and has been done. I am currently button shifting my race car from the steering wheel. BrettM PM me when you get a chance I would like to call you and talk. Brad BMP Racing

Yes, I got them on right after UPS dropped them off. I'll have to take some pics tomorrow. Sorry for the HUGE delay! Brad

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7959939964&rd=1&sspagename=STRK%3AMESE%3AIT Thanks for your interest! Brad

I am going to align it today and drop the T-case 1". Should have pics soon. Brad

I ended up at 21" of spring length full weight with the Rusty's coils. I was at 17.75 with the old 4" Trailmaster coils and 2" alum. spacers. My Jeep is sitting level now. First impression was a stiffer ride than the previous set up. These coils should make my rear flex a little better. Now I...

Here's mine. It's constructed of 3/16 and 1/4" plate. It's a little stubby for you hardcore rock guys! Brad

They are 5.5" in dia. I should have them on tomorrow. I'm sitting about 3" low in the front right now with 6" of lift. These should get me where I need to be. I'm wanting about 21" of spring length loaded. Any bets on how much these compress when weighted? Brad

Thanks Crash for the link. I was thinking they were around 5.75" in dia. I will verify tomorrow. I can't wait to get these put on! Brad