Search results

I have just put in a fuel pump , but the hanger set up suggested it was the 4 cylinder pump. All parts fit great on the hanger, but it isn't getting the correct amount of fuel. The engine is popping and missing. If you look at the fuel pump that every one has posted up on there sites it is a...

I pulled my drivers door to fix the broken hinge. I have replaced the entire door previously. All the wires hooked right up and windows worked then. Now after reinstalling it I don't seem to be getting power to the door. I have plugged in all the wire connections and the Relay /Fuse is good. I...

I have a Dorman Header. Does any one know if there is a warranty on those ? I've had it less then a year and now it leaks. I have retightened every bolt and it still ticks. I can't find a crack, but unless it blew out the gasket there has to be one somewhere. If they are known for cracking can...

I know the AC causes quite a bit of condensation, but I'm getting it all the time now. When I run the AC I get a ton more then I used too. What can I check to calm it down a bit. It isn't coolant either. Thank you

I just tightened my header bolts and one is stripped. Can I put in a longer bolt and maybe hit some threads in the back ? Or are we talking helicoil ? Thanks !

I just put in a new thermostat when I replaced my Housing gasket because it leaked. Well I thought I burped it and it was pushing small amounts of coolant through the Water pump weep hole. Then I realized I hadn't burped it with the heater on. So I have reburped it with the heater on and now it...

I have a set with carrier and spiders. $50 and you pay shipping. PM or Call 208 424-9601.

I want to buy a pair of new leaf packs. I'm tired of building bastard packs just to have them sag in a year. I have heard Pro Comp leafs suck, but is that true with their leaf packs too. I know they have a built in shim on them. So any one owning PCs actual leaf packs Please let me know what...

I am putting together a D30 that will be getting torn down probably more then I care too. I hate dealing with the dust sheilds on the hubs. What are the benefits of these finger slicing chunks of metal ? I clean my wheels from the backside real good after wheeling any way. I try and stay out of...

I broke a front axle shaft this last weekend and now my semi new ball joint on that side is toast. It can probably be pulled out by hand if I tried hard enough. Is it common to wipe out a ball joint when the u-joint and shaft clanges around after being broken ? I drove it about a mile to get...

I would like to get a stronger inner axle for my Dana 30 dis-connect. (27 sline) I need the one that goes from the carrier to the shift fork.Not sure if it has its own name or what. I'd like a stronger one or maybe even a Chromo if you can just pick that one axle up as opposed to all 3 pieces...

I have bought axles from a 93 YJ w/disconnect and I want to put them in my 1988 XJ with the same set up. The YJ axles are larger along with the larger u-joints. Is there anything else I will need to change on the XJ before installing ? Are the seals the same ? I know they say change the seals...

I am going to try and pick up a Teralow kit for my NP231. I have an 88 with a Dana 44 and my lift is about 5.75". Where can I find a drive line for it ? Are there drive lines you can cut down and make fit that will work. Just wondering what options I have that will cost less then the $600 for a...

$ 325 is half of what I paid. It has a couple of Rock dents , but when it is mounted you can't even tell. If you check out this link "http://myweb.cableone.net/cherokeexj/DSCF0868.JPG" pic you can see they aren't noticable. I have all the mounting hardware. These tie into the bulk head and...

Wasn't sure where to post so I put it here. Has any one done this fab by any chance. I have a guy who is interested in my Warn Winch Bumper, but he has a 1995 Grand Cherokee. Can it be done ? If so what fab work needs to happen ? Thanks

I just bought a set of used BFG Mud Terrains and one has a Very Slow leak. 10 lbs over night if it sits just right. I would take it to the tire shop to get it fixed except one problem. One lug is missing part of it and a small piece of belt wire is showing thru. I know as soon as they see that...

Is there any drive line issues going to a 8.25" from a Dana 35. The Chrysler is going in a 90 XJ currently running the Turdy Five. I'm just wondering if the pinion is longer ? He has about a 5" lift so his TC yoke is pulled out a little already and he has good bumpstops to fit 35s so he...

What all has to be done ot swap a 5 speed Puegot to an A-4 auto. 87/88 swap ? If possible I could use all the problems involved unless it is what most consider not worth the swap. Thanks

Terra Flex Revolver Shackles $115 shipped anywhere in the Lower 48 or Canada Prefer Paypal if Cash or Check it has to clear before Shipped ! PM or E-Mail: [email protected] 208-424-9601 :phone:

I just went to grease my new ball joints for the first time and the zerk isn't even on one side. I tried to screw in a new one and it is stripped. It doesn't look like that ball joint was ever greased after install. So I'm assuming it was stripped from the get go. What can I do about a stripped...