Search results

1999 XJ built lots of nice upgrades Just to name a few Cryco rear with relocated shock mounts, disc brakes alloy shafts Front Dana 39 hi pin. Over knuckle steering. Alloy shafts tube covers. Both 4.56 gears and ARB lockers RE hybrid suspension rear relocating shackle Front short arm with drop...

I just finished installing some home made battery main cables in my 99 XJ 4.0. I used 1/0 all around: battery to PDC, PDC to Alternator, Battery to starter, Battery (-) to fender, Battery (-) to coil, Body to rear block stud ground. I used a big buss fuse to eliminate the fuseable link in the...

I'm putting together a DD and I need the following: Rear End: D35 with ABS, stock 3.55 gears. Header Panel Grill Driver tail light Factory wheels (and tires maybe) Good radiator Stock electric fan AC Condenser

So one of my presents this morning is a pre-lube kit from Motorprelube: http://www.motorprelube.com/ I haven't seen any install write-ups and I was wondering if anyone here has any experience with similar kits. I will be installing this in my 99 XJ and if there's interest I will try to do a...

So I'm in the middle of upgrading my power steering. Got the 4.7 WJ pump and the 99 Durango steering box. Got everything appart and now it's time to put the Durango box in. Here's the thing, my Durango box did not come with a pitman arm attached. Having both boxes side by side the output...

Why, oh, why can't they exist here... http://vehicles.vivastreet.co.uk/cars+glasgow-g62/jeep-cherokee-2-5td-60th-anniversary-edition/21512257

Here are my specs: 99 XJ AW4 242 L6. Running with about 6 inches of hybrid lift. I also have Rusty's 1 inch drop crossmember and no SYE. Gears are 4.56 with both front and rear ARBs. All was well until I installed RE drop brackets when I started to notice a grumbling, grinding type noise in...

Editted by Administrator. NO. It's *NOT* legit. They haven't even filed off the copyright notices.

Ok, here's my dilema. This past Sunday I broke a second factory front shaft. This time it was the driver's side. The ears on the inner shaft just sheared off. This is the second set of shafts I went through. They were factory Spicer shafts in good shape upgraded with 760 joints. The joints...

I have a used Or Fab Winch Bumper that I just took off my 95 XJ project. It has slight rock rash but it's straight and all there. Comes with hardware and includes the grill guard hoop and the steering box brace. You'll have to source longer bolts for the steering box. The winch is also used...

A friend of mine with a 95 XJ recently went to a fuel cell and gave me his skid row gas tank skid plate. Neither he nor I realized that Skid Row makes a different style of gas skid for the 97-01 so the plate wasn't supposed to fit. Well, I jacked it up in place with my ATV jack just to check...

Never had any starting problem until today. Jeep has always started on the first few cranks. Today I finished mounting Rusty's air tube, cleaned the tb with some carb cleaner and tried to start her. I got nothing but cranking and no start. Cycled the key on and off but cannot hear the fuel...

I have a 99 Cherokee and while trying to remove the factory track bar I had the (mis)fortune of breaking the axle mount bolt. Does anybody know the actual size of this bolt so I can get the correct replacement for when I remove the broken one?