Search results

My electric fan runs fine until the engine heats up and then it kind of slowly turns and sometime stops completely and that is with A/C on. Am I looking for another one or is it something else? As soon as the fan cools off then it works fine again.

Okay i started my timing cover, oil pan and rear main seal replacements and my oil pump has a rubber donut like thing between the inspection plate and the oil pan which is causing me to not be able to remove the rear two 1/2" bolts. I did search and I couldn't find anyone else who had this...

Well time to move onto something else. I have my 1995 Cherokee Country 4x4 up for sale. It has 276,000 miles on it but runs great. No issues with driveline accept typical rear main leak. Good: 1. 31" BFG AT's with about 50% left and 15"x8" AR767 type rims with 4" backspacing 2. 4.5" lift...

Okay I am switching my 95 to 4wd from 2wd. I have the 242 case from my 88 XJ and 88 trans but I need to know if the speedo gear and housing from my 2wd 95 trans will work in the 242 case? It was originally the cable driven housing and I know the 95 is the electronic speedo. Are they totally...

Okay I think I already know the answer to this qeustion but a buddy has a Factory trac-loc from a YJ with 3.07 gears and he wants to swap the ring gear onto the trac-lok carrier from the D35 YJ into his 3.55 gear XJ. I know the break for the D35 Xj is 3.55 so I assume that the ring gear will not...

Okay I am switching my 95 to 4x4 and just wondering if the crossmembers are the same between the 2wd and 4wd? In other workds can I use my 2wd Crossmember with the 4x4 AW4? Both autos of course.

I am having some vibration under acceleration and around 60-70 miles an hour, also when letting off the gas it make a decent clunk and when it is coasting at certain speeds it makes a pretty bad rattling type sound almost like a loose u-joint, but I checked and there was no play in them...

Need on for my MJ 4x4 swap and needs to be comanche 4.0 Auto shortbox rear driveshaft unless the stick one will work.

have a 91 MJ(COmanche) Short bed with 4.0 HO Auto 2WD with a rebuilt engine with only 3000 miles on it, with aftermarket mopar camshaft and high volumn oil pump. Body is in good shape no rust showing. All body work was done with metal welded in. I am half way through a 4wd conversion to it and I...

Interested in a t-case from an AX15 trans but will it bolt up and work with the AW4 trans from an XJ? Yes I know it needs to be the same splines

Well I am switching my column shifted MJ to a Floor Shifter and was wondering if the cables from the column shifter will just pop on the floor shifter and work? I assume they should be the same? Or do I have to hit the yards and get them from an xj? I have the floor shifter and the 4x4 shifter...

Looking for a grey cloth bench seat from a stick comanche, it is the seat with the indent in the middle to clear the small console when the seat is moved forward. Don't care if it is dirty just needs to be in good condition. Will take black as well. Prefer pickup I can drive anywhere near...

Hey guys I need some help here, not sure if this is the right place to ask but here goes. I need the specs on a 1991 Jeep Comanche 2wd 4.0 HO Auto Shortbox. I need the info on the door sticker since mine is gone since someone repainted the jeep and took the sticker off. My Jeep is 200 miles away...

Looking for the following cheap: 91+ Full Gauge Cluster from XJ or MJ has to be electronic speedo and have the tach etc.. not the dummy lights which I already have. XJ Engine Skid plate. NP242 Transfer case and shift and linkages. prefer to pick up in MI but will consider paying for shipping...

Is the 8.8 a bolt in on the MJ in stock form without going SOA? I know they are a little off for my YJ but only like small amount. I am not lifting it right now since it is my DD and I have my XJ and MY YJ for that, but I love the 8.8 and disk brakes for hauling stuff (putting one in my YJ as...

This is a carrier I am interested in buying for my MJ. Nto sure but I am pretty sure it is not a trac-lok? So what is it? Apprently it is for the dana 35 since it has the small ring gear, and yes I know it is a posi but what unit is it? It is out of a 91 Cherokee. The numbers on it are: Ring...

Okay guys I need a definative answer to this. I have a 91 MJ with the 2wd AW4 and 4.0 HO engine and I want to swap in my 89 4wd AW4. Will the electrical connectors match up and will the TCM from the 91 work with the 89 AW4?

switching to 4x4 in 2wd comanche questions Okay guys just wondering what kind of issues I am looking at putting an 89 Aw4 and Np242 in a 91 comanche 4.0 2wd. Anything I should keep an eye out for or do the two trannies swap directly out? Will the 91 TCM and wiring all match up with the 89 Aw4...

Well I picked up a 91 XJ Overhead console to put into my MJ and I had to cut it right behind the sunglasses dropdown so I had to get rid of the rear lights. Well now I realized that the rear lights are the only ones that come on with the dome lights. Everything else works but I took the rear...

Okay I tried to take the Spider's out of my c-clip 94 YJ dana 35 and put them in my 91 Comanche c-clip dana 35 and they wouldn't fit. The bore for the side spiders that goes into the carrier is bigger on the comanche than it is on the YJ??? Any reason for this? I though they would be all the...