Search results

Thanks...I'll try it...

Read a few posts talking about Ed Steven's web site. They all go to a site that has been shut down..is it available anywhere else? Thanks.

Both my old trailer and the new one have brakes...wouldn't even consider it without. We're looking at a 2008 Palomino Stampede 17. Basically a camper with fold out bunks...thanks for the info

I have a 2000 XJ, 2" lift with 31x10.50's. I've pulled a tent trailer weighing around 2200lbs with no problem. We're looking at getting a 17' Hybrid Trailer that when loaded will weigh somewhere around 3500lbs. I have a weight distributing hitch and sway control. I searched the posts on towing...

If you look at the where the lower control arms mount to the body, you will see the holes are oblong. Behind the mounting bracket there are two bolts sticking out on each side...pointing toward the rear. When you loosen them, as well as the LCA bolt, you can change the caster there. Check the...

FWIW...my 2000 with 2" had a shake at 50mph. Really bad when you hit a bump. Replaced just about everything in the front but maybe 3 ball joints. I had it aligned two times by different shops...still there. The one shop said the castor was "close" to what I told him I wanted. Finally I was...

As far as lockers go and living in WNY where it sometimes snows a bit, I thought I'd leave the diff's open..

Due to an unscheduled $3000.00 bumper bender and a DIY repair, I have about $1000.00 to spend on my XJ...wife gets the rest... Currently: My XJ is a 2000 with a 8.25 rear, RE 2" BB and 31x10.50's...I don't get off road much, it's my wife's DD for now, but eventually it will be my Rubicon...

RE 3.5" super ride w/aal to 14005?

My 2000 XJ has a Rubicon Express 2" kit, spacers on the front and add a leafs on the back...looks good with 31X1050's...fine for the street, been off road with a little twist and no rubbing...swaybar still connected...you will need to place a washer or two on the steering limiters to keep from...

I've searched and found plenty on 31x10.50's on 3" but nothing on 2". My jeep is used primarily on pavement and deep snow, nothing to really get the suspension twisted..has anyone had this setup? Any pictures? And a second thing, I've had a wobble situation that seems to go away when I put my...

My 2000 xj with 2" lift has a shake from 45 to 50 mph...sometimes it's worse than other time...depends on road surface...I've changed out a few things, but the main thing is the tires were out of balance due to wear...I balanced them myself at a local shop and I know they are balanced..but the...

It's a 2000..just replaced the joint this time last year...I don't see that it's bad..still looks good no slop...

Already rotated them...no difference in shake...maybe their both off balance the same...One idea I forgot to mention...I tighten the axle nut the back woods way with no torque wrench...could too tight/loose be the problem?

I have the wobble on what appears to be the driver's side wheel. I have researched these posts as well as other sites...can't find a solution..my problems is...about a year ago I changed the hub and ujoint on the driver's side..the passenger side ujoint was replaced around the same time. The...

I've got a 2000 XJ..build date of 11/99 and it has over 95,000 miles..I've been reading about the cracked heads on this years model...but mine seems ok..from what I've read I seem to be the exception to the rule, any one else out there without the crack?

I have a 2001 cherokee, 50,000 miles. When I hit a bump in the road, I get a shake or bounce in the front, it can be felt through the steering. Could it be the shocks or steering stabilizer? This doesn't act like bad shocks, the shocks feel firm when you push down on the fender, no bounce then...