Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Changing to a true 3-link and would like to utilize the tnt crossmember that i have from the y-link kit. Has anyone used this to build a real 3-link off of? Looking for some tips and or build threads.
Thanks
30 spline ARB + 4.88s = $650.
WJ knuckles with spacers welded , new '01 uni bearings, calipers, rotors, pads, tie rod, drag link and track bar = $650.
Inner & outer 30 spline chromolly axles with u-joints = $500.
Empty housing with all heavy duty brackets. = $150.
Everything is in good...
Dana 30 -Chromoly 30Spline inner and outers. 760 joints with 4.88 gears and ARB locker. WJ knuckles set-up with over the knuckle steering. New uni bearings and ball joints.comes with tie rod, drag link, and modified R.E trackbar -- $1600.
Ford 8.8- Disk brakes 4.88s set-up for dual triangulted...
I am looking for a new or used 4 bolt steering box that will work with my 89 xj that has the T&T Customs steering box plates. I am in campbell, Ca 95008.
I have stumbled upon a wrecked 05 Rubicon and can get the 4.0, manual tranny and the np241 for a good price. Can this setup be put in a renix just like a 94 setup could be? Would I be better off swapping the computer and wiring harness too. I believe they have the distributorless iginition, can...
Like the have been working on my cherokee now for the past month and have not hadmuch luck. I am located in the bay area (campbell). I have an 89 with a 94 block, head and intake. Are you interested or can you reccomend a good shop in my area that knows jeeps? Thank you.
-Nick
P.s
for details...
So I just finished swaping the 94 motor into the 89 cherokee. I am using the old wiring harness with the complete long block off the 94. I am pretty sure the timing is correct. The jeep idles fine, but when given throttle it sputters and doesnt rev up. Would the TPS casue this? I put on a new...
For sale is a manual tranny and 231 T-case from a 94 xj. Everything worked when pulled. Comes with clutch flywheel and tranny mount. Both for $200. or best offer.
I have four 34"x10.50" LTBs on 15" rockcrawler rims and one 34"x9.50" tsl on the same rim. Two tires have 75% and three have 60% percent. $400./ obo. Lcated in campbell, ca
Hey guys I just bought my second cherokee. It is a 1994 4dr. and has 4wd 4.0 manual tranny and a np231. I scored this thing for a hundred dollars and almost made it home. It has a rebuilt dealer motor that has about two years on it and unknown mileage. It runs great when you start it up and then...
Can someone post up a newer link than the 4x4wire one. I know that i will need knuckles, calipper brackets,callipers and rotors from a WJ. Is there a certain year that I should be aiming for? Also I will buy unit bearing for a 2000/2001 xj/tj, right? Then i will need to get the track bar bracket...
Okay so I think I have made up my mine and am going to order Essentially Offroads 4dr. xj cage. Does anyone have this cage in there jeep? How do you like it and is there any drawbacks about it? Also, I was looking at bolt in cages and the only one I found is made by rockhard4x4, are there any...
Okay so ever since I put larger over stock tires on my xj about 3 maybe 4 years ago the tires have never been perfectly straight up and down on the sides. It looks like a sand buggy where the tires tilt in on the top. It is not that bad, but I know there is something wrong. I cant tell if the...
Okay everyone so I have done away with the ABS on my 89 xj. I replaced the system with a m/c and booster from a 2004 wj. The last thing is that I have to hook up the vacumn hose that goes into the manifold. The only problem with doing that is that I didnt have the vacumn hose before. So What do...
So in the past few weeks I replaced the main and rod bearings, while I was under there I also put in a new high volume melling oil pump. I figured I would also replace the timing chain with a double roller from cloyes because it was making a few new sounds so I did that also. The dobble roller...
The time has come for a new T-case, but which one should I choose? Should I get a 2spd, 3spd. or the 4spd. Does stak or atlas have a better reputation/warranty than one another. Also what distributor should I get it from as far as best pricing? What all will I need to do as far as driveshafts...
I am looking to get a new set of axles for the rear end and would like to keep the stockers as spares. What are my choices? I have an 89xj with a f8.8 out of a 95xploder. I am currently running 34s and my next set of tires might be 35, but no bigger.