Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Can you put a longer slip yoke on a 01 Jeep Cherokee? It's a 4 x 4 with 3 inches of lift. I heard you can use a YJ slip yoke? Can you use a driveshaft from a D35 I heard they are 2 inches longer?
I just installed the 4 hole upgrade injectors. It now takes 4 seconds to start now. It is running rich and burning lots of gas. Is this normal or did I get defective ones?
Do I need an adapter plate if I change my 0331 head to a 0631 head? I have a Banks header for a 01. I thought you only needed an adapter plate if you are running a stock exhaust manifold on a 0331 head.
I have a oil pump that has about 2,000 miles on it. I replaced it with a new oil pump but my oil pressure didn't change. Engine was built with loose tolerances.
$50.00 shipped
Which injectors should I get with a modified engine with free flowing exhaust and a 62mm throttle body? I have tried the bosch upgrade but I had trouble starting the jeep with these installed. I had to hold the pedal to the floor to start. It seemed to run rich when started. I could smell fuel...
Just installed a BBK new 62mm throttle body and now my idle is at 8-900 RPM. Should be at 500 RPM. It's not the set screw I have already tried that. I had 500 RPM idle on the stock throttle body. Is the computer trying to get used to the new throttle body or is it defective. It does drop to 500...
I have a 2001 with the 0331 head. I have a banks torque tube header on my jeep. Do I need to order a Banks gasket for the header or will the factory gasket work from the factory header. I figured the gasket might be different with the banks header.