Search results

ok built a 4.7 for my mj last spring been running for aprox 10k no issues. Few feeks ago noticed a minor oil leak comeing from disributer base. Dident fix it right away was not bad. Got some time to fix it this week put a new seal noticed the old one was all flattend out and pushed out kinda...

Im Kinda stuck in a corner here. I orderd axle shafts, Superior evolution series for my new cut down hpd44 build im finishing up. Well I got the inners but the chevy outers I need are not in pruduction and im looking at at least 1.5 months and it's not a 100% if they will even have them by...

http://www.comancheclub.com/forums/viewtopic.php?t=4326 Check this thread out. I duno that steering is borderline scary to me and those Long arm mounts :gee: Dirrr looks good to me boys :wow:

Well as the title points out the stroker that I have been building is finnaly in the home streach. In case anyone hasent been following here are the specs. 87 block bored .40 Decked .35 reman 95 head 99 intake sivolites dished to 30 cc CCR 8.8.1 63mm bored tb Modifyed apn header with 2.5...

Ok I just wrapped up my stroker motor so not It's time to Start of the front axle seeing I dont have one And I really want to try out the new motor. Im Leaning towards a ford HP because im currently running 35's but im stepping up to 36-37's soon. I fould A 74 f100 housing about 1 hour away...

Just finished up last night sold my buddy my hp 30 with 4.88's and arb and built him a 8.8 with 4.88 super 88 kit c clip elim axles and a arb. I ran the air line out of where the stock tone ring pickup went used a 1/2 npt to 1/4 npt pipe fitting and welded it in. Also It's getting a claytons...

Has anyone looked at the steering setup on the new jk?? No more inverted y setup It looks like the nuckes could be put on a xj/yj and some a tirerod and draklink could be fabbed up very easily to make a mutch better steerig setup.. any thoughts The stock jk stuff wont bolt up because i think...

Just putting the final touches on my stroker project berfore startup And Im wondering whats a better wire OE Mopar at $20 my clost or BOSCH Premuim at $35 Bosch have a nicer plug end boot and the wire insulation jacket seems thicker and more flexible. Im not shure what to run with also plugs...

Ok im buttoning up my 4.6 stroker this week one thing that I may have overlooked is the lifter preload. Im running stock replacment rockers/pushrods. But my block is decked 0.035 will this be a problem or should I put some washers under those rocker arms????

I know someone that is offering to buy my front HPD30 with 4.88' and an arb. I set this axle up about a year ago had new balljoints and wheel bearings then so it's pretty mutch mint. Someone is offering me $700 for it and might take it in favor of a hp44 that im going to build from 75 ford...

OK I just orderd an APN header for my 4.6 stroker build. I was running a pacesetter before :laugh2: Junk... Now I have no downpipe I trashed the stock one a long time ago and I dont want to go with a facory crushed stocker. Who sells a downpipe for an XJ/MJ I see a Banks for a yj but the yj...

Ok so Im putting my stroker together tonight and I noticed my head has a crack coming from the front header bolt to the corner of the block and a Piece is about to chip off plus it has 150k and im putting it on a 4.7 stroker so. I think im going to get a reman head and a new HO one at that to...

Read this if your building or thinking about building a stroker and havent bought rods yet. Ok So I figured this weekend Since I got my motor back from the machine shop today Id put my 4.6 stroker together. WELL when I bought my rods off an engine supply company reman they said Rod#707 and...

Ok Im building a Renix stroker. What in injectors can I use I hear everyone saying mustang but does that apply to all jeeps or just HO??? I read somewhere that injectors off a mid 90's dodge/jeep 5.2 will work if so on the Renix and what year truck/jeep do i need them out of.

I just bought a 97 cherokee dana 30 front 35 rear. Has 165k on it and the diff oil has never been done When I pulled the covers there was alot of metal shaving and the oil looked like silver paint. Once I cleaned everything I noticed the gears dont look bad at all. Should I replace the gears...

Im building a stroker And the rods that the machine shop is willing to sell me have diffrent casting numbers 3 are one number 3 are diffrent. the person there says they interchange in his book and should be fine should I worry?? I read somewhere that all the amc 258 rods are the same except the...

Ok Dino I have a question. I have a 90 renix im building a stroker in. Im going to use my renix head because it's allredy been redone and it has a header and bored tb for the intake. Im going with the low Compression rockcrawler on your website. Am I ok running a stock replacement HO cam or...

Ok my motor is toast so Im going to start on my stroker. I have a 87 bare block that I may have machined. Or sould I get a junkyard 96+ becuase it's stronger and I wont have to swap all of my accessory brackets oil pan etc. Plus I dont have a head I heard 91-95 are the best 96 up are the same...

I Need new motor mounts my stockers just let go digging my fan clutch into my week old $171.00 SFI 3 core radiator so im pissed. New one is on the way but I need to do the mounts I dont want ton of vibes So i was looking at the MORE ones regualr are around $80 bombproff are like $129 is it worth...

AM i crazy. I have seen this done on a yj Cummins sells a 3.3L 4 cly Diesel motor has a SAE4 bellhouseing pattern. It's actually made by Komatsu turbo and you can get it anywhere from 85 HP tp 110. Now i know it fits in a yj and looking at the mesurements i think it will fit. It's not too heavy...