• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Search results

  1. N

    Low speed vibration

    Its a 96 xj with a 3in rusty lift and 31 in mtrs
  2. N

    Low speed vibration

    I get a vibration at low speeds. It happens when I'm slowing down to stop or when im in first just rolling. As soon as I get up to speed it stops. Anyone know what it could be?
  3. N

    error codes

    wheres it located and Whats involved in repalcing the sensor? Just unscrew it and screw the new one it? Or do i gotta use some teflon tape or something with it to make sure it seals?
  4. N

    error codes

    So I checked my error codes... I got 12 for sure looks like 43 which comes up 4/5 times and 22 followed by end code 55 I heard error codes dont come up more than once though? Acording to this website anyways... But code 43 can have more than one meaning. So if a couple things are messed would...
  5. N

    96 Xj Wont start

    how do u count the codes? Is there a list of codes and what they mean? I tried counting it before and was confused...
  6. N

    96 Xj Wont start

    Got it running.... I tried finding tdc and installing it again.. Must've been off one tooth retarded or something cause its running nice now. Was a little hard to start guessing it was a bit flooded but once it was going it ran great. Only prob now is my check engine light is on. Could it be...
  7. N

    96 Xj Wont start

    I shifted all the wires over counter clockwise and it ran but ran rough... does it mean my distributor is out a bit now? Its weird to cause the #1 on the cap is not where the #1 was on the old cap...
  8. N

    96 Xj Wont start

    Is it a fixed distributor or not? Its got a prong / slot on it where the bolt goes through
  9. N

    96 Xj Wont start

    used the screwdriver to get it to line up
  10. N

    96 Xj Wont start

    I fliped it 180 to make sure and still nothing
  11. N

    96 Xj Wont start

    I was changing the cap and rotor the other day and of course nothing can go easy.... One of the bloody bolts breaks off on the cap... (why couldn't they just use clips like in my charger i don't know.... SO then i go to drill it out and use a screw extractor.... As im drilling im thinking this...
  12. N

    Tires and spedometer

    Anyone know what the rear end options were for a stock 96xj manual 4.0 high output?
  13. N

    Tires and spedometer

    I just swaped the stock tires off my xj for 245/75/r16s' How much is my spedometer off. Is it possible to correct it? I know my charger has a gear that you can swap for the spedometer.
  14. N

    Rustys 3in

    Oh ya. tire wise it has 245/75/16 on it and Forget the wheel backspacing but it rubs slightly at full lock. Figure that might have to be known...
  15. N

    Rustys 3in

    Just installed rustys 3in lift http://rustysoffroad.com/mm5/merchant.mvc?Screen=PROD&Store_Code=rustys&Product_Code=300AL&Category_Code=sus_xj_kit Was wondering what else anyone would recomend to improve it suspension wise? I'm going to get front discos and remove the rear sway bar since i...
  16. N

    RedTek

    http://www.redtek.ca/ anyone try there stop leak for a/c's? Was thinking of trying it out.
  17. N

    Tire Pressure?

    You're right I used kg instead of Lbs.. Didnt convert. My bad:thumbup: It's at 25 lbs now I'll add a few more
  18. N

    Tire Pressure?

    Nice link.. According to that I should be running 14-17 psi on the road. I'll lower mine to 20 and see how it goes...
  19. N

    Tire Pressure?

    The tires are 245/75/16 good year mtrs
  20. N

    Tire Pressure?

    How do you decide tire pressure to run?
Back
Top