Search results

Wanted to see if the part where the oil pressure sending unit threads into can be switched out? Say if the sending unit where cross threaded... I was thinking that with original 4.0L that the sending unit was parallel to the ground and came out of that octagonal block perfectly perpendicular...

Quick question guys, I have been having issues getting my engine up to temp while moving. I have a 4.7L stroker with a 3 row radiator, hesco water pump, and a 180* thermostat. I have dual electric fans, but I never switch them on unless I am sitting at idle for several minutes and approach...

I just wanted to see if anyone else had an issue with their stock oil pressure gauge not cooperating with a high volume pump? I originally installed a melling hv pump and my gauge wouldn't read correctly. Had the motor gone through by another builder, and installed a hesco blueprinted hv pump...

I snapped the timing chain in my stroker a few months ago, pulled the motor went through it. Motor is back in, just finished reconnecting everything today, wires etc. Connected the power wires to the battery and TA DA! Horn constant blarring, I'm a little hung over so I disconnected the wires...

I am pretty sure this had been done, but my question is it worth the hassle? I want to upgrade the headlight wire loom and fan wiring harness for aftermarket fans, but I would like to modify just the wiring from the ECM to the headlights, and from the ECM to the Fans. I want to do it this way...

I have a '97 with the 4.0L and the aw4, I have ocassionally had voltage spikes for the past say 3 years. The first few times I had it I just thought that it was an alternator issue, so I installed a new bosch alternator and a optima. Problem solved, for a couple of years, then the same issue...

Hey guys, I did the ZJ disc conversion on my 8.25 a couple of months ago, love the setup. But how did the rest of you guys that have done the conversion work the E-brake? I have the E-brake connected in a kind of rigged way, I mean it works.... barely. Is it possibly to get the ZJ E-brake...

We all know that changing the oil in our 4.0Ls is a messy job, in cruising around on the summit racing website what I have been thinking of doing is buying the oil filter relocating kit http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DG4985&N=700+%2D149424+115&autoview=sku...

I picked up rear brake calipers from an '01 WJ a couple of weeks ago. They came from a non-c clip dana 35, these are bigger than the ZJ brakes thats why I would like to use them (and I already have these pieces). I have measured the holes on the mounting brackets for the calipers and it in no...

One of my friends found a totaled WJ (2000) at a local junk yard, I know that I want all the front steering pieces (knuckles, tie rod, draglink, and possibly the calipers), but my main question is will the rear brake setup work on my '97 (backing plates, calipers)? I know a lot of guys use the...

I have a set of side markers and turn signal assemblies. Both sets are in perfect shape. One of the side markers has a small amount of overspray on one edge. I replaced mine with the clear ones. They came off of my '97, but they will fit anything from '97-'01. Side Markers $15 shipped...

Is there any difference between the a/c compressor on a '95 cherokee and a '98? I looked it up on advance auto parts website and it is two different part numbers. The reason I ask is my dad has a '95 and the clutch is going bad on the compressor, but I have found a '98 that has been totalled...

I am looking for a sport bike, something in or near the 600cc category. Preferably a honda, yamaha, or suzuki in the late 90s to early 00 year model. I am willing to spend about $3500, I don't really care about mods, I just want something to ride that runs well and looks good. Any bike will...

Hey guys I am just looking for suggestions here. About a month or so ago I took my Jeep, yes it is my DD, to a local shop to have the tires rotated. I dropped it off before I went to work and picked it up when I got off. I was on the way to work/school the other morning and noticed a bump in...

One of my friends and I are building a 4.7 stroker, since we hydro-locked the engine in his '91 a few months ago. I have checked out Dr. Dyno's page and several others, but what are the advantages or disadvantages to running hypereutectic pistons or silvolite hypereutectics? I wanted to check...

Hey folks I have a few parts that need to get out of my way.... please feel free to make an offer... 5 - '97 Cherokee Country Wheels in good cond. (on ebay) http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120066199805&rd=1,1 Center...

I have a set of 5 of the "honeycomb" wheels that came off my Cherokee, they came off my Jeep a few weeks ago, when I got my new wheels and tires. Four of them have BFG Long Trail Radials on them, and the spare has a Goodyear Eagle on it. I think all of them are P225/75R15, would like to get...

Want to find springs to finish my lift, looking for RE 2.5" fronts, and RE 3.5" rear leafs. Minimal wear/sag...hopefully Thanks, Jeff Tutor

Does anyone have the RE1684 hardware package to go along with the RE1600 or can those pieces be purchased at a hardware or auto parts store?

Looking for new or slightly used RE1600 trackbar or the JKS equivalent. Quadratec nor RE are getting any cheaper, I confirmed last weekend that mine is indeed need of replacement. Help, that popping noising in the front end is getting on my nerves....