Search results

Im telling you guys It,s the carden joint check it out I chased my tail forever. Just buy a driveshaft from a junkyard.

check the ball/socket in the middle of the double cardon I had the same problem ,sounded like the diff gears were stripped or the tcase chain was jumping and low and behold (after an unnesesary diff service and t-case reseal) the stupid ball/socket in the double cardon was binding.

Barpin style shocks are a pain and sorta flimsy I just built a set of hardcore bpe's for my pile, not cause I had problems with the bar pins but I had a shock go out In a very bad way and I had a set of 06 F250 fx4 ranchos that were like brand new, but they mount on a 9/16 bolt so I had to make...

Acually it happens from the exaust manifold warping and breaking the bolt, check your manifold for cracks. Its very common for the rear and front studs Ive done about a hundred of em usually I replace the manifold. the best way to get them out is to remover the intake and exaust manifold and...

When I worked for jeep I ordered some 4wd plow coils from the parts dept for my MJ and it sat about 1 1/2 taller I think I spent $50 on the pair like 4 years ago and the sping rate was perfect That truck saw a lot of air and i never had a problem, flexed good too. I know it's not junkyard but it...

You can buy a O2 sensor eliminators but they usually come in pairs, so you would have an extra. Having the check engine light on is no good on a 96 It will retard timing and defuel the engine, get it off some how. I dont get how it was never on before, But some 96 XJ's still didnt have rear O2's...

I know this sounds stupid, I will bet money on it though, its those exact brand tires I have seen it on three trucks and it makes no sense at all right after the geolanders were put on they pulled to the right. I replaced ball joints rotated tires adjusted torsion bars (the first vehicle was a...

I work at a custom truck shop so Ive seen it all and the skyjacker is pretty solid for the price, just plan on the tcase drop. and some shackles in a year.

I Installed one of those lifts and I had to make my own tc drop It worked out great I used 1 1/4 box steel drilled holes straight through and i just put the nuts back on with a open end wrench cost me $5.00 and it worked so well I made some for my Xj. Also I recommend taking out 1 of the caster...