Search results

I have a 89 4.0 it stalls only in cold weather never stalls in warm weather need advise where to look I am lost

i have some new bilsteins 5125,11.94 travel ,29.70 extended,17.91 collapsed installed them but not used they are to long will sell they are $75.00 new ,make offer if interested

how do i know if my 89 with a 242 has a crush sleave or not did a search but no direct answer replacing pinion seal

I have a re 1600 trackbar with new ends and two bilstien 5125 shocks,travel 11.94,valving255/70,extended29.70,collapsed1791 will sell for $65.00 and $75.00 for the trackbar I bought the wrong size shocks they are brand new , noticed they were wrong size after I cut the boot off

mine broke i took the back seat belt off and moved it to the drivers seat till i got a new one

5125 or5150 i have short arms with drop brackets 6" lift what valving and length do i need i do alot of street driving and three times a year offroad cant decide the valve i want a smooth street drive looking at255/70

where are you located i am interested in the mirrors

I have a re1600 track bar with new ends will sell

how do you remove water spots from the windows any homebrew methods out there

had. one it only worked when the cigarette lighter was on so the current could get in,if your key is out it doesnt work

yes it came from re

I tried to get a level measurement off the t-case ,but nothing is level it has are hack&tap thats why I took the crossmember its the same as the output.

I have an 89 with an 242 and 6" lift and a sye,and have some rear vibes also have shim in there looks like 1/4 inch high, driveway has an 2 degree slant and here are the jeep specs.diff. is 14 degrees ,driveshaft is 17 1/2 degrees,crossmember is 0 degrees how far am I off

with longer shackles they will hit the rear bumper bolt until they smooth out, its freaking annoying, dont hot rod over bumps or corners til lthey smooth out ,put alot of weight in the back for a week to help

yes its true it takes about two weeks and then keeps get better , I swear it rides better than stock now

mine did the same thing even came on the freeway talk about a mess,what i did to cure this is to take the seal out and put rtv around it and put it back in have not hade a problem since

Im looking for the lower control arm measurements for the re adjustable arms with rc drop brackets in the search I can only find for the re drop brackets and I see that they are different .

does anbody know what size wheel studs are for the dana 44

where are you at I have one maybe two

my 89 4.0 will stall at idle , sometimes, and it is not often ,but if I run it hard the idle will be high, sometimes ,this is a random thing do not know when it will happen ,runs great at speeds Im thinking it is electrical I have a new gas filter and pump ,when I go to start it back up it...