Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Are there any beadlocks in 15" rim size that will fit a ford 1979 D44HP and D60 with discs on all corners.
I believe the rear discs are Chevy setup.
I was going to order trailready beads and test fit my MRWs which wont fit at all. Not even with grinding on the calipers.
Any suggestions??
And YES I SEARCHED about 40 times now.
I believe it was posted by CRASH here.
Showed a D44HP build up using a TNT Truss.
If anyone can find the thread, please post the link here.
I was looking at buying one from a guy. Was told his skid wouldn't fit my 1990. He has a 1997.
Are the mounting points for the gas tank skid different from year to year?
I've been doing some reading in my spare time about TBs.
The biggest question used to be Who to buy from. Now it seems What SIZE is the real question.
Reading up on the 4.7 V8s in the grand cherokee, I see they are running a 68mm roughly.
Seems that most of the reading I come across on the...
In the barn now.
Motor fires up. Its a new rebuild. New timing chain cover, new oil pump gears.
NO OIL PRESSURE.
We have tried priming the motor for about 15 minutes using the starter...Can't get oil pressure.
Finally we fired up the motor for 10 seconds. There was assembly lube on the...
FS: 1964 Nascar Hemi Complete motor
Item Description: 1964 Nascar Hemi Complete motor
Location: Flat Rock, MI
Price: $18,000
Contact: PM me here OR jeepcj7 at gmail dot com I can provide phone contact after email contact is made.
Only serious buyers please.
This motor was built by Dean...
The list is long but I am looking for ideas I haven't thought of.
4.7 stroker
Replaced with NEW CPS, AEC, AIT sensors
Replaced with spare used TPS tested with analog ohm meter and has smooth curve.
O2 sensor new last fall
Map sensor...UNKNOWN but worked on last motor. Adjustable map sensor not...
Wanting to hook up a 8207 coil.
My 1990 XJ has 4 wires to the stock coil.
Per MSDs idiot techs which told me about hooking up a different model coil with a custom special connector which isn't available....I was told to hook both the 5v and 12v lines to positive and the 2 grounds to the...
Well I have my long arms installed. Clayton system.
I have ZJ steering setup installed. Also have JKS quicker disconnects.
Tonight I jacked up the front and put jack stands under the frame to let the axle droup. As I rotated the steering wheel, I can't make a left turn very far.
The...
Everything I am finding about axle setup and doing a regear shows Dana markings on the end of the pinion.
Chryco 8.25 seems to have a coding on the markings.
Anyone know how to read the end of the pinion to get the shim offset.
Any other info about setup would help too.
Search turns up very...
I want to hook up an oil pressure gauge and temp gauge.
I don't want to disconnect the stock gauges...just want to hook in a couple of autometers to get extra numbers.
Any ideas??
Or others.
Stats:
90 XJ
Stock fuel pump and lines
99 intake
mustang 24lb injectors.
I searched and it mentioned using a 91-96 HO fuel rail on the 99 intake. But also mentioned something about fuel line and return line...Can anyone clarify that to me...Are we talking the entire line back to...
Why in the WORLD would you spend $300-400 on a D44 XJ axle when you can get 8.25 axles all day long for $75-150.
Both have lockers available.
Both can use the disc brake setup.
Both have gear available
Both are strong
Both have better axle shafts available.
So Why in the HELL would I waste...
Are the D30 yokes from a CJ7 the same as the D30 yoke of a D30HP XJ??
I have a U-bolt style yoke (NOT STRAPE STYLE) from my 7 and my XJ one is in bad shape. Wondered if all the maiting surfaces were the same.
Longarm kit for 90 XJ with springs, shackles, etc. Looking at RE 8" kit kinda.
D44 HP front and matching 9" rear with welded radius arms...Cast not wanted.
Rear bumper tire swing out model.
35" tires Xterrains have done me well.
Warn 9.5 winch
Post here or PM me whatcha got. I have cash...
Intake was milled and pressure tested after a crack was professionally welded up.
Intake has been ported for better flow. It has been bead blasted and painted. Looks brand new.
If your looking for a $100-125 intake from the junk yard, please shop there. This has been modified for better...
Ported for better flow. Had a crack in it and was professionally welded and pressure tested to verify the repair.
The face was milled for flatness.
$175 plus shipping.
PM me if interested.
Ported for better flow. Had a crack in it and was professionally welded and pressure tested to verify the repair.
The face was milled for flatness.
$175 plus shipping.
PM me if interested.