Search results

Sometimes shifting into park, the shifter won't go past Reverse. I have to wiggle a bit to get it into park. Possible causes? Caused by shifter or in trans?

What would cause my 87xj to stay in open loop? Once in awhile it will work properly and go to closed loop in about 30 seconds. Usually it will stay open. Just started this last Thursday. Before that it went closed loop like clockwork. 87 xj. 4.7 stroker. Bigger injectors and throttle body...

Got this cool little REM device that tells me whats going on with my RENIX real time. While scanning through all the options I notice that my EGR doesn't go into on mode very often. When is the EGR supposed to activate?

Dropped a new engine in my 87 along with aftermarket Motor Mounts. I only have about 1 mile on it so for, but noticed there is SIGNIFICANT vibes between 800-1200 RPM's. Before and after those rpm's the vibes are only slightly more than the stock engine/motor mounts. The vibes happen driving and...

swapped my 87 intake with an 88 and the newer one has this extra piece as well as the egr has an extra vaccum nipple. Anyone know what it does and how it's hooked up? Sent from my SM-G930V using Tapatalk

87 Cherokee... help me identify where these go. Heater control vacuum, cruise control vacuum and misc plug. Sent from my SM-G930V using Tapatalk

Come wheel with Goatman and I as we celebrate Earth day! April 21st-23rd. Calico ghost town near Barstow. 4 runs Saturday ranging mild to wild... with Dinner and Raffle Saturday night. Night run on Friday? Straggler run Sunday? Proceeds benefit Stewards of the Sequoias... Helping keep public...

Anyone point me to a Diagram that shows what color wires do what for the power doors? I have a window that won't work, trying to hunt down why. 87XJ

So my Steering Gearbox Broke free of the frame on the trail for the second time. Since the first time it happened a few years ago in Moab, I have added a TB brace, a steering box brace that attaches over the sector shaft and have welded a bar across under the radiator area. I have checked the...

I have made my control arms myself. In the bottom I used ballistic fab poly joints and Hiems. On the uppers I used Hiems on both ends. I think the uppers are transmitting a lot of clunks and bumps. Ballistic fab doesn't have a Polly 2" joint (but they do have a ballistic joint) Anyone have a...

If your looking for something to do this weekend, come wheeling with Goatman and myself. We are hosting a fundraiser there. Going to be a great time. Runs, dinner and Raffle! Raffle includes Hawaiian Vacation, Chromoly axle shafts, winch and lots more stuff! HMU if you need more information!

I will be needing a new intake manifold sometime this year. I specifically need an 87 that has the EGR port on the bottom. Check your parts piles and see if you have one laying around please! Jeremy

After 15 years, I finally submitted my heep for rig of the month... Help me out! If you vote for me, I'll drink a beer in your honor... If you vote for that other cool rig... I'll still drink a beer... http://www.naxja.org/forum/showthread.php?t=1125226

My four Rocker switches on the dash of my 87 have gotten brittle and broken. What have some of you done to replace them? Is there a source for those for direct replacement, or should I modify the dash to put in New aftermarket Rockers? Do those Rockers have full power going through them?

Coming down a trail yesterday, shifting into gear the shifter button felt a little funky and I had to use a little more than normal force to get it into drive. From there it is stuck. I can go from drive to N. The button will not push in AND the ignition lock will not easily move to the off...

I'm replacing my 87 doors with some 90 donor doors. Of course the wiring colors don't quite match. Does anyone have any knowledge of what wires do what so I can try to hook up the power windows?

Running Coyote Lake, Going in Friday Oct. 16th. A group of around 6 Rigs. If anyone is looking for something to do that weekend, Let's go wheeling!

I'm having a bit of trouble keeping the quick connect lines that plug into the side of my AW4 Transmission from leaking. That fitting unscrews and I was just going to replace it with at fitting that has a nipple and put a short piece of hose on there. Does anyone know the size of that fitting...

This Saturday (Sept 5th) I will be running Lockwood/ Miller trail up near Frazier park. Meet at the Chevron on 99/Taft Highway at 7:30 in Bakersfield and leave for the trail at 8am. We will stop for gas at the Flying J in Frazier Park at 8:45 and should be at the trailhead around 9:15am. It can...

Parting out my HP D30. She's been good to me! Nitro Chromolly Axles (both sides) $300 Spare Complete Passenger side Yukon Chromolly Axle $150 Detroit Locker $300 D30 4.88's $75 D44 4.88's $75 Riddler Cover (sold) If you need other D30 parts (I have lots of Spare stock axles), hit me up!