Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
No LEDs or any light mods. I put the key in accessory position and the hazards work fine, all the lights that need to be blinking keep blinking correctly and indefinitely. When I tried the blinkers w/o the engine running they only blinked a few times before turning off entirely, and I couldn't...
Hi all, recently and seemingly simultaneously, *both* my turn signals have started doing something odd. When I turn one on, it might blink on and off regularly a few times, but 9 times out of 10 it will inevitably stop clicking and just freeze on the arrow; instead of alternating between on and...
Thanks for the reply. So unless I plan on being ready to replace the injectors I shouldn't bother taking out the fuel rail? Is there anything else up the fuel line I could more easily check, at the very least to narrow down the problem to the injectors?
And yeah, I checked the battery and the...
Thanks! How would I go about testing the injectors to find out which ones are leaking? Is it as simple as running the car and then looking for fuel around each one?
Hi everyone- For the past eight months to a year or so my '00 XJ has had the seemingly very common issue of not starting up on the first turn of the key, and will just keep trying to turn over to no avail . Nine times out of ten if its been sitting for more than a couple hours I have to turn the...
I poked around their website and products and it looks to be disengaged by a foot pump the PO must have thrown out, there's a little gasket on the back of the box where the air hose would go. I can't find the pump sold separately so I'm just gonna tuck it back in with some fresh zip ties in case...
OK, so after wiggling around a bit more than my bones would like, I got a peek at the back which had a sticker labeling it "TREMCO Computer Safe" which seems to be an anti-theft system. Since all the material I can turn up on it seems outdated or advertising, my followup question is whether...
Hi all, 2000 XJ with AW4. I'm currently chasing down the source of a P0740 code and before I try to drop the pan and start swapping in new solenoids, I want to make sure it's even necessary to drop the pan at all considering I haven't ever dropped a transmission pan and I'm wary of that dipstick...
Hi all, I've been dealing with some PITA P0740 code for a bit now and I was trying to check the solenoids through the TCM (fool's errand) when I noticed a black plastic box had broken off its zip tie and its ground was disconnected. This is in a 2000 XJ I got from Florida which had...
Yeah exactly, I wanted to avoid having my FM transmitter always on or having to unplug it every time I park the car. Swapping the twin USBs for the 12V as is would have caused the same problem, but I wouldn't be able to unplug it.
So from what I understand, my FM transmitter plugged into the...
So is how I hooked it up going to cause problems or is what you explained just a better way of going about it? If it is an issue the way I've got it, could you go into more detail on how to rectify it from what I have now?
Yep, separate fuses, according to the diagram (https://knigaproavto.ru/shemy/en/jeep/cherokee/900-1997-2001-jeep-cherokee-xj-fuse-box-diagram.html) and my own test. I just pulled #1 on the diagram there. Thankfully, both 12V sockets are connected with plastic components on the end, so the live...
Used all my artistic skills to draw up this before/after: https://ibb.co/2qWqGKz
Assuming that looks correct, I have two questions:
1. What should I do to the leftover wires running from the battery?
2. Can I splice the new wires in anywhere down the length of the ignition wires, or should...
The one I've got comes with a little rubber stopper to cover it when not in use, so the light itself wouldn't be too much of an issue. The problem I'm trying to avoid is having something like a GPS or other USB powered device in there permanently later on, which I would just end up having to...
From what I understand, it wouldn’t be the USB ports per se that would draw continuous power, but the blue LED(s) inside which light up when powered. Looking at the thing, it doesn’t seem to be feasible just to crack it open and remove the LED without destroying it, and i’ve had a very difficult...
Hi there, I recently got gifted one of those replacement sockets to convert the cigarette lighter into a double USB port. I'm fairly sure it's this one: https://www.amazon.com/gp/product/B076D8CQYV/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Stupidly easy install on the driver's side...