Recent content by XJTJYJ

Would bad hubs make a growling sound? It seems like it is only coming from the drivers side. Similar to having large mudders on but they are regular street tires.

I have a 2000 XJ (stock) that might have bad bearings in the front hub. How can I check for that? Is it pretty common for these to go out? I have severa; Jeeps and never replaced a hub.

Will the bulk heater hose work for a 2000 sport or do I have to buy the expensive precurved hoses?

Thank you, I will try when it is idling to see if in 3.5 quarts is too much. If it is should I try to drain just a couple of pints?

Help: I drained it cold and filled it back with 3.5 quarts of dex III. How it is reading beyond full. Do I have to start it or something, or drain it ou until it is at the add mark when cold Please help! Also Autozone sold me the wrong belt so I spend 45 minutes trying to fit the wrong...

According to a Mobil OEM sales rep, 10w-30 (green) and 5w-30 (blue) are the same, only marketed in different bottles.

awesome info!

Do I have to heat up the auto transmission by driving before I drain and refill? If it is cold, how do I make sure tghe level is correct when I refill?

Excellent. Thanks for the tips!

I have heard of a dye that is on the market. On my TJ, i painted them with bedliner and it look OK if you do several coats.

I did not mean that your advice is a PITA. It is priceless. I did not mean any disrespect. I woas looking for a magic shortcut so I will have more time tomarrow to get drunk and stare at the overgrown grass. That is a sweet site! I would like to tube out my XJ but the ball and chain would...

Does anyoe know if the plastic POS door trim on a 2000 sport is replaceable and where to get it. Could I remove the trim on all of the doors? would that leave any holes. Mine got broken pretty good. I would like to say it happened on the rocks of moad because the 4 hooter girls that were...

That is a PITA. Is ther anyway to tell by looking at them? Perhaps some markings or something. Would my dealer tell me? (would the dealer be correct?)

Do I measure from the bottom to th top while it is laying on its back? Is there anyway to determine while it is on the Jeep?

I have a 2000 Sport and Napa is telling me that the replacement rotors are available in cast or composite hubs depending on what I have on there now. How can I tell?